Automatic build of init-system-helpers_1.69+nmu1+kali1 on crius for kali-dev/armhf by rebuildd 0.4.2+nmu2 Build started at 2026-09-04 14:52:56.238368 ****************************************************************************** init-system-helpers_1.69+nmu1+kali1.dsc: dscverify: init-system-helpers_1.69+nmu1+kali1.dsc failed signature check: gpg: Signature made Fri Sep 4 14:51:22 2026 UTC gpg: using EDDSA key FEBF1BF5CC73E2FAAB282B5CFE66C58C097F6A6E gpg: Can't check signature: No public key Validation FAILED!! Recorded job init-system-helpers_1.69+nmu1+kali1_armhf.job building /srv/build.kali.org/build/work/kali-dev/init-system-helpers_1.69+nmu1+kali1.dsc /srv/build.kali.org/bin/build: STARTING BUILD OF /srv/build.kali.org/build/work/kali-dev/init-system-helpers_1.69+nmu1+kali1.dsc (arch=armhf dist=kali-dev version=1.69+nmu1+kali1 try=1) /srv/build.kali.org/bin/build: SBUILD OPTS: --no-source --no-run-lintian --verbose --apt-update --apt-upgrade --no-apt-distupgrade --arch=armhf -d kali-dev --no-arch-all sbuild (Debian sbuild) 0.89.3+deb13u1~bpo12+2 (22 September 2025) on crius.kali.org +==============================================================================+ | init-system-helpers 1.69+nmu1+kali1 (armhf) Fri, 04 Sep 2026 14:52:58 +0000 | +==============================================================================+ Package: init-system-helpers Version: 1.69+nmu1+kali1 Source Version: 1.69+nmu1+kali1 Distribution: kali-dev Machine Architecture: arm64 Host Architecture: armhf Build Architecture: armhf Build Type: any I: Unpacking /srv/build.kali.org/.cache/sbuild/kali-dev-armhf.tar to /srv/build.kali.org/tmp/sbuild.jI8ZWVk6iL... I: Setting up the chroot... I: Creating chroot session... I: Setting up log color... I: Setting up apt archive... +------------------------------------------------------------------------------+ | Update chroot Fri, 04 Sep 2026 14:53:05 +0000 | +------------------------------------------------------------------------------+ Get:1 http://repo.kali.org/kali kali-dev InRelease [34.0 kB] Get:2 http://repo.kali.org/kali kali-dev-only InRelease [25.8 kB] Get:3 http://repo.kali.org/kali kali-experimental InRelease [25.7 kB] Get:4 http://repo.kali.org/kali kali-dev/contrib Sources [79.5 kB] Get:5 http://repo.kali.org/kali kali-dev/non-free Sources [119 kB] Get:6 http://repo.kali.org/kali kali-dev/non-free-firmware Sources [10.4 kB] Get:7 http://repo.kali.org/kali kali-dev/main Sources [18.2 MB] Get:8 http://repo.kali.org/kali kali-dev/non-free armhf Packages [116 kB] Get:9 http://repo.kali.org/kali kali-dev/main armhf Packages [20.5 MB] Get:10 http://repo.kali.org/kali kali-dev/non-free-firmware armhf Packages [14.8 kB] Get:11 http://repo.kali.org/kali kali-dev/contrib armhf Packages [90.9 kB] Get:12 http://repo.kali.org/kali kali-dev-only/non-free-firmware Sources [587 B] Get:13 http://repo.kali.org/kali kali-dev-only/main Sources [327 kB] Get:14 http://repo.kali.org/kali kali-dev-only/contrib Sources [2667 B] Get:15 http://repo.kali.org/kali kali-dev-only/non-free Sources [9815 B] Get:16 http://repo.kali.org/kali kali-dev-only/non-free armhf Packages [7658 B] Get:17 http://repo.kali.org/kali kali-dev-only/non-free-firmware armhf Packages [488 B] Get:18 http://repo.kali.org/kali kali-dev-only/contrib armhf Packages [1855 B] Get:19 http://repo.kali.org/kali kali-dev-only/main armhf Packages [412 kB] Get:20 http://repo.kali.org/kali kali-experimental/main Sources [23.9 kB] Get:21 http://repo.kali.org/kali kali-experimental/non-free Sources [747 B] Get:22 http://repo.kali.org/kali kali-experimental/non-free armhf Packages [556 B] Get:23 http://repo.kali.org/kali kali-experimental/main armhf Packages [32.5 kB] Fetched 40.0 MB in 3s (14.0 MB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages have been kept back: cpp cpp-arm-linux-gnueabihf g++ g++-arm-linux-gnueabihf gcc gcc-arm-linux-gnueabihf The following packages will be upgraded: apt debianutils libapt-pkg7.0 libblkid1 libc-bin libc-dev-bin libc-gconv-modules-extra libc6 libc6-dev libmount1 libre2-11 libseccomp2 libsmartcols1 libuuid1 util-linux 15 upgraded, 0 newly installed, 0 to remove and 6 not upgraded. Need to get 9030 kB of archives. After this operation, 11.3 kB of additional disk space will be used. Get:1 http://repo.kali.org/kali kali-dev/main armhf debianutils armhf 5.24 [92.3 kB] Get:2 http://repo.kali.org/kali kali-dev/main armhf libc-dev-bin armhf 2.43-4 [37.4 kB] Get:3 http://repo.kali.org/kali kali-dev/main armhf libc6-dev armhf 2.43-4 [1402 kB] Get:4 http://repo.kali.org/kali kali-dev/main armhf libc-gconv-modules-extra armhf 2.43-4 [1134 kB] Get:5 http://repo.kali.org/kali kali-dev/main armhf libc6 armhf 2.43-4 [1538 kB] Get:6 http://repo.kali.org/kali kali-dev/main armhf libsmartcols1 armhf 2.42.2-4 [128 kB] Get:7 http://repo.kali.org/kali kali-dev/main armhf libuuid1 armhf 2.42.2-4 [32.7 kB] Get:8 http://repo.kali.org/kali kali-dev/main armhf libblkid1 armhf 2.42.2-4 [157 kB] Get:9 http://repo.kali.org/kali kali-dev/main armhf libmount1 armhf 2.42.2-4 [193 kB] Get:10 http://repo.kali.org/kali kali-dev/main armhf util-linux armhf 2.42.2-4 [1133 kB] Get:11 http://repo.kali.org/kali kali-dev-only/main armhf libapt-pkg7.0 armhf 3.3.3+kali1 [1053 kB] Get:12 http://repo.kali.org/kali kali-dev/main armhf libseccomp2 armhf 2.6.1-1+b1 [45.7 kB] Get:13 http://repo.kali.org/kali kali-dev-only/main armhf apt armhf 3.3.3+kali1 [1435 kB] Get:14 http://repo.kali.org/kali kali-dev/main armhf libc-bin armhf 2.43-4 [510 kB] Get:15 http://repo.kali.org/kali kali-dev/main armhf libre2-11 armhf 20251105-1+b2 [138 kB] Preconfiguring packages ... Fetched 9030 kB in 1s (10.3 MB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../debianutils_5.24_armhf.deb ... Unpacking debianutils (5.24) over (5.23.2) ... Setting up debianutils (5.24) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libc-dev-bin_2.43-4_armhf.deb ... Unpacking libc-dev-bin (2.43-4) over (2.43-3) ... Preparing to unpack .../libc6-dev_2.43-4_armhf.deb ... Unpacking libc6-dev:armhf (2.43-4) over (2.43-3) ... Preparing to unpack .../libc-gconv-modules-extra_2.43-4_armhf.deb ... Unpacking libc-gconv-modules-extra:armhf (2.43-4) over (2.43-3) ... Setting up libc-gconv-modules-extra:armhf (2.43-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libc6_2.43-4_armhf.deb ... Unpacking libc6:armhf (2.43-4) over (2.43-3) ... Setting up libc6:armhf (2.43-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libsmartcols1_2.42.2-4_armhf.deb ... Unpacking libsmartcols1:armhf (2.42.2-4) over (2.42.2-2) ... Setting up libsmartcols1:armhf (2.42.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libuuid1_2.42.2-4_armhf.deb ... Unpacking libuuid1:armhf (2.42.2-4) over (2.42.2-2) ... Setting up libuuid1:armhf (2.42.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libblkid1_2.42.2-4_armhf.deb ... Unpacking libblkid1:armhf (2.42.2-4) over (2.42.2-2) ... Setting up libblkid1:armhf (2.42.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libmount1_2.42.2-4_armhf.deb ... Unpacking libmount1:armhf (2.42.2-4) over (2.42.2-2) ... Setting up libmount1:armhf (2.42.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../util-linux_2.42.2-4_armhf.deb ... Unpacking util-linux (2.42.2-4) over (2.42.2-2) ... Setting up util-linux (2.42.2-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libapt-pkg7.0_3.3.3+kali1_armhf.deb ... Unpacking libapt-pkg7.0:armhf (3.3.3+kali1) over (3.3.2+kali1) ... Setting up libapt-pkg7.0:armhf (3.3.3+kali1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11938 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.6.1-1+b1_armhf.deb ... Unpacking libseccomp2:armhf (2.6.1-1+b1) over (2.6.1-1) ... Setting up libseccomp2:armhf (2.6.1-1+b1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11939 files and directories currently installed.) Preparing to unpack .../apt_3.3.3+kali1_armhf.deb ... Unpacking apt (3.3.3+kali1) over (3.3.2+kali1) ... Setting up apt (3.3.3+kali1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11939 files and directories currently installed.) Preparing to unpack .../libc-bin_2.43-4_armhf.deb ... Unpacking libc-bin (2.43-4) over (2.43-3) ... Setting up libc-bin (2.43-4) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 11939 files and directories currently installed.) Preparing to unpack .../libre2-11_20251105-1+b2_armhf.deb ... Unpacking libre2-11:armhf (20251105-1+b2) over (20251105-1+b1) ... Setting up libre2-11:armhf (20251105-1+b2) ... Setting up libc-dev-bin (2.43-4) ... Setting up libc6-dev:armhf (2.43-4) ... Processing triggers for libc-bin (2.43-4) ... +------------------------------------------------------------------------------+ | Fetch source files Fri, 04 Sep 2026 14:53:24 +0000 | +------------------------------------------------------------------------------+ Local sources ------------- /srv/build.kali.org/build/work/kali-dev/init-system-helpers_1.69+nmu1+kali1.dsc exists in /srv/build.kali.org/build/work/kali-dev; copying to chroot +------------------------------------------------------------------------------+ | Install package build dependencies Fri, 04 Sep 2026 14:53:26 +0000 | +------------------------------------------------------------------------------+ Setup apt archive ----------------- Merged Build-Depends: debhelper-compat (= 13), fakeroot, fakechroot, libtest-deep-perl, perl:any, python3-docutils, build-essential Filtered Build-Depends: debhelper-compat (= 13), fakeroot, fakechroot, libtest-deep-perl, perl:any, python3-docutils, build-essential dpkg-deb: building package 'sbuild-build-depends-main-dummy' in '/build/reproducible-path/resolver-L2nuhM/apt_archive/sbuild-build-depends-main-dummy.deb'. Ign:1 copy:/build/reproducible-path/resolver-L2nuhM/apt_archive ./ InRelease Get:2 copy:/build/reproducible-path/resolver-L2nuhM/apt_archive ./ Release [609 B] Ign:3 copy:/build/reproducible-path/resolver-L2nuhM/apt_archive ./ Release.gpg Get:4 copy:/build/reproducible-path/resolver-L2nuhM/apt_archive ./ Sources [845 B] Get:5 copy:/build/reproducible-path/resolver-L2nuhM/apt_archive ./ Packages [708 B] Fetched 2162 B in 0s (143 kB/s) Reading package lists... Reading package lists... Install main build dependencies (apt-based resolver) ---------------------------------------------------- Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Solving dependencies... The following additional packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism docutils-common dwz fakechroot fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libexpat1 libfakechroot libfakeroot libffi8 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libncursesw6 libpipeline1 libpython3-stdlib libpython3.14-minimal libpython3.14-stdlib libreadline8t64 libsqlite3-0 libtest-deep-perl libtool libuchardet0 libunistring5 libxml2-16 m4 man-db media-types netbase po-debconf python3 python3-docutils python3-minimal python3-roman-numerals python3.14 python3.14-minimal readline-common sensible-utils sgml-base tzdata xml-core Suggested packages: autoconf-archive gnu-standards autoconf-doc dh-make gettext-doc libasprintf-dev libgettextpo-dev gnulib-l10n groff libtool-doc gfortran | fortran95-compiler m4-doc apparmor less www-browser libmail-box-perl python3-doc python3-tk python3-venv docutils-doc fonts-linuxlibertine | ttf-linux-libertine texlive-lang-french texlive-latex-base texlive-latex-recommended python3.14-venv python3.14-doc binfmt-support readline-doc sgml-base-doc Recommended packages: curl | wget | lynx libarchive-cpio-perl libgpm2 libltdl-dev libmail-sendmail-perl libpaper-utils python3-pil python3-pygments ca-certificates The following NEW packages will be installed: autoconf automake autopoint autotools-dev bsdextrautils debhelper dh-autoreconf dh-strip-nondeterminism docutils-common dwz fakechroot fakeroot file gettext gettext-base groff-base intltool-debian libarchive-zip-perl libdebhelper-perl libelf1t64 libexpat1 libfakechroot libfakeroot libffi8 libfile-stripnondeterminism-perl libmagic-mgc libmagic1t64 libncursesw6 libpipeline1 libpython3-stdlib libpython3.14-minimal libpython3.14-stdlib libreadline8t64 libsqlite3-0 libtest-deep-perl libtool libuchardet0 libunistring5 libxml2-16 m4 man-db media-types netbase po-debconf python3 python3-docutils python3-minimal python3-roman-numerals python3.14 python3.14-minimal readline-common sbuild-build-depends-main-dummy sensible-utils sgml-base tzdata xml-core 0 upgraded, 56 newly installed, 0 to remove and 6 not upgraded. Need to get 20.4 MB of archives. After this operation, 87.1 MB of additional disk space will be used. Get:1 copy:/build/reproducible-path/resolver-L2nuhM/apt_archive ./ sbuild-build-depends-main-dummy 0.invalid.0 [896 B] Get:2 http://repo.kali.org/kali kali-dev/main armhf libexpat1 armhf 2.8.3-1 [104 kB] Get:3 http://repo.kali.org/kali kali-dev/main armhf libpython3.14-minimal armhf 3.14.7-1 [883 kB] Get:4 http://repo.kali.org/kali kali-dev/main armhf python3.14-minimal armhf 3.14.7-1 [2113 kB] Get:5 http://repo.kali.org/kali kali-dev/main armhf python3-minimal armhf 3.14.7-3 [25.3 kB] Get:6 http://repo.kali.org/kali kali-dev/main armhf media-types all 14.0.0 [30.8 kB] Get:7 http://repo.kali.org/kali kali-dev/main armhf netbase all 6.6 [10.3 kB] Get:8 http://repo.kali.org/kali kali-dev/main armhf tzdata all 2026c-1 [260 kB] Get:9 http://repo.kali.org/kali kali-dev/main armhf libffi8 armhf 3.8.0-2 [24.4 kB] Get:10 http://repo.kali.org/kali kali-dev/main armhf libncursesw6 armhf 6.6+20260608-2 [112 kB] Get:11 http://repo.kali.org/kali kali-dev/main armhf readline-common all 8.3-4 [74.8 kB] Get:12 http://repo.kali.org/kali kali-dev/main armhf libreadline8t64 armhf 8.3-4 [158 kB] Get:13 http://repo.kali.org/kali kali-dev/main armhf libsqlite3-0 armhf 3.53.4-2 [858 kB] Get:14 http://repo.kali.org/kali kali-dev/main armhf libpython3.14-stdlib armhf 3.14.7-1 [2178 kB] Get:15 http://repo.kali.org/kali kali-dev/main armhf python3.14 armhf 3.14.7-1 [861 kB] Get:16 http://repo.kali.org/kali kali-dev/main armhf libpython3-stdlib armhf 3.14.7-3 [8252 B] Get:17 http://repo.kali.org/kali kali-dev/main armhf python3 armhf 3.14.7-3 [26.0 kB] Get:18 http://repo.kali.org/kali kali-dev/main armhf sensible-utils all 0.0.26 [27.0 kB] Get:19 http://repo.kali.org/kali kali-dev/main armhf libmagic-mgc armhf 1:5.47-4 [345 kB] Get:20 http://repo.kali.org/kali kali-dev/main armhf libmagic1t64 armhf 1:5.47-4 [101 kB] Get:21 http://repo.kali.org/kali kali-dev/main armhf file armhf 1:5.47-4 [42.3 kB] Get:22 http://repo.kali.org/kali kali-dev/main armhf gettext-base armhf 1.0-3 [321 kB] Get:23 http://repo.kali.org/kali kali-dev/main armhf libuchardet0 armhf 0.0.8-2+b2 [65.7 kB] Get:24 http://repo.kali.org/kali kali-dev/main armhf groff-base armhf 1.24.1-1 [1240 kB] Get:25 http://repo.kali.org/kali kali-dev/main armhf bsdextrautils armhf 2.42.2-4 [91.1 kB] Get:26 http://repo.kali.org/kali kali-dev/main armhf libpipeline1 armhf 1.5.8-3 [41.8 kB] Get:27 http://repo.kali.org/kali kali-dev/main armhf man-db armhf 2.13.1-1 [1432 kB] Get:28 http://repo.kali.org/kali kali-dev/main armhf m4 armhf 1.4.21-1 [312 kB] Get:29 http://repo.kali.org/kali kali-dev/main armhf autoconf all 2.73-2 [516 kB] Get:30 http://repo.kali.org/kali kali-dev/main armhf autotools-dev all 20240727.1+nmu1 [60.0 kB] Get:31 http://repo.kali.org/kali kali-dev/main armhf automake all 1:1.18.1-4 [877 kB] Get:32 http://repo.kali.org/kali kali-dev/main armhf autopoint all 1.0-3 [820 kB] Get:33 http://repo.kali.org/kali kali-dev/main armhf libdebhelper-perl all 14.3 [77.3 kB] Get:34 http://repo.kali.org/kali kali-dev/main armhf libtool all 2.6.2-2 [553 kB] Get:35 http://repo.kali.org/kali kali-dev/main armhf dh-autoreconf all 22 [12.2 kB] Get:36 http://repo.kali.org/kali kali-dev/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get:37 http://repo.kali.org/kali kali-dev/main armhf libfile-stripnondeterminism-perl all 1.15.1-1 [17.1 kB] Get:38 http://repo.kali.org/kali kali-dev/main armhf dh-strip-nondeterminism all 1.15.1-1 [6020 B] Get:39 http://repo.kali.org/kali kali-dev/main armhf libelf1t64 armhf 0.195-1 [53.1 kB] Get:40 http://repo.kali.org/kali kali-dev/main armhf dwz armhf 0.17-1 [105 kB] Get:41 http://repo.kali.org/kali kali-dev/main armhf libunistring5 armhf 1.4.2-1 [431 kB] Get:42 http://repo.kali.org/kali kali-dev/main armhf libxml2-16 armhf 2.15.3+dfsg-1+b1 [561 kB] Get:43 http://repo.kali.org/kali kali-dev/main armhf gettext armhf 1.0-3 [2508 kB] Get:44 http://repo.kali.org/kali kali-dev/main armhf intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get:45 http://repo.kali.org/kali kali-dev/main armhf po-debconf all 1.0.22 [216 kB] Get:46 http://repo.kali.org/kali kali-dev/main armhf debhelper all 14.3 [934 kB] Get:47 http://repo.kali.org/kali kali-dev/main armhf sgml-base all 1.31+nmu1 [10.9 kB] Get:48 http://repo.kali.org/kali kali-dev/main armhf xml-core all 0.21 [19.0 kB] Get:49 http://repo.kali.org/kali kali-dev/main armhf docutils-common all 0.23+dfsg-2 [124 kB] Get:50 http://repo.kali.org/kali kali-dev/main armhf libfakechroot armhf 2.20.1+ds-18+b2 [37.9 kB] Get:51 http://repo.kali.org/kali kali-dev/main armhf fakechroot all 2.20.1+ds-18 [26.6 kB] Get:52 http://repo.kali.org/kali kali-dev/main armhf libfakeroot armhf 2.1.4-1 [28.5 kB] Get:53 http://repo.kali.org/kali kali-dev/main armhf fakeroot armhf 2.1.4-1 [73.5 kB] Get:54 http://repo.kali.org/kali kali-dev/main armhf libtest-deep-perl all 1.205-1 [52.3 kB] Get:55 http://repo.kali.org/kali kali-dev/main armhf python3-roman-numerals all 4.1.0-1 [9196 B] Get:56 http://repo.kali.org/kali kali-dev/main armhf python3-docutils all 0.23+dfsg-2 [433 kB] Preconfiguring packages ... Fetched 20.4 MB in 1s (14.1 MB/s) Selecting previously unselected package libexpat1:armhf. (Reading database ... 11939 files and directories currently installed.) Preparing to unpack .../libexpat1_2.8.3-1_armhf.deb ... Unpacking libexpat1:armhf (2.8.3-1) ... Selecting previously unselected package libpython3.14-minimal:armhf. Preparing to unpack .../libpython3.14-minimal_3.14.7-1_armhf.deb ... Unpacking libpython3.14-minimal:armhf (3.14.7-1) ... Selecting previously unselected package python3.14-minimal. Preparing to unpack .../python3.14-minimal_3.14.7-1_armhf.deb ... Unpacking python3.14-minimal (3.14.7-1) ... Setting up libpython3.14-minimal:armhf (3.14.7-1) ... Setting up libexpat1:armhf (2.8.3-1) ... Setting up python3.14-minimal (3.14.7-1) ... Selecting previously unselected package python3-minimal. (Reading database ... 12295 files and directories currently installed.) Preparing to unpack .../00-python3-minimal_3.14.7-3_armhf.deb ... Unpacking python3-minimal (3.14.7-3) ... Selecting previously unselected package media-types. Preparing to unpack .../01-media-types_14.0.0_all.deb ... Unpacking media-types (14.0.0) ... Selecting previously unselected package netbase. Preparing to unpack .../02-netbase_6.6_all.deb ... Unpacking netbase (6.6) ... Selecting previously unselected package tzdata. Preparing to unpack .../03-tzdata_2026c-1_all.deb ... Unpacking tzdata (2026c-1) ... Selecting previously unselected package libffi8:armhf. Preparing to unpack .../04-libffi8_3.8.0-2_armhf.deb ... Unpacking libffi8:armhf (3.8.0-2) ... Selecting previously unselected package libncursesw6:armhf. Preparing to unpack .../05-libncursesw6_6.6+20260608-2_armhf.deb ... Unpacking libncursesw6:armhf (6.6+20260608-2) ... Selecting previously unselected package readline-common. Preparing to unpack .../06-readline-common_8.3-4_all.deb ... Unpacking readline-common (8.3-4) ... Selecting previously unselected package libreadline8t64:armhf. Preparing to unpack .../07-libreadline8t64_8.3-4_armhf.deb ... Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8 to /lib/arm-linux-gnueabihf/libhistory.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libhistory.so.8.2 to /lib/arm-linux-gnueabihf/libhistory.so.8.2.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8 to /lib/arm-linux-gnueabihf/libreadline.so.8.usr-is-merged by libreadline8t64' Adding 'diversion of /lib/arm-linux-gnueabihf/libreadline.so.8.2 to /lib/arm-linux-gnueabihf/libreadline.so.8.2.usr-is-merged by libreadline8t64' Unpacking libreadline8t64:armhf (8.3-4) ... Selecting previously unselected package libsqlite3-0:armhf. Preparing to unpack .../08-libsqlite3-0_3.53.4-2_armhf.deb ... Unpacking libsqlite3-0:armhf (3.53.4-2) ... Selecting previously unselected package libpython3.14-stdlib:armhf. Preparing to unpack .../09-libpython3.14-stdlib_3.14.7-1_armhf.deb ... Unpacking libpython3.14-stdlib:armhf (3.14.7-1) ... Selecting previously unselected package python3.14. Preparing to unpack .../10-python3.14_3.14.7-1_armhf.deb ... Unpacking python3.14 (3.14.7-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../11-libpython3-stdlib_3.14.7-3_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.14.7-3) ... Setting up python3-minimal (3.14.7-3) ... Selecting previously unselected package python3. (Reading database ... 13341 files and directories currently installed.) Preparing to unpack .../00-python3_3.14.7-3_armhf.deb ... Unpacking python3 (3.14.7-3) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../01-sensible-utils_0.0.26_all.deb ... Unpacking sensible-utils (0.0.26) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../02-libmagic-mgc_1%3a5.47-4_armhf.deb ... Unpacking libmagic-mgc (1:5.47-4) ... Selecting previously unselected package libmagic1t64:armhf. Preparing to unpack .../03-libmagic1t64_1%3a5.47-4_armhf.deb ... Unpacking libmagic1t64:armhf (1:5.47-4) ... Selecting previously unselected package file. Preparing to unpack .../04-file_1%3a5.47-4_armhf.deb ... Unpacking file (1:5.47-4) ... Selecting previously unselected package gettext-base. Preparing to unpack .../05-gettext-base_1.0-3_armhf.deb ... Unpacking gettext-base (1.0-3) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../06-libuchardet0_0.0.8-2+b2_armhf.deb ... Unpacking libuchardet0:armhf (0.0.8-2+b2) ... Selecting previously unselected package groff-base. Preparing to unpack .../07-groff-base_1.24.1-1_armhf.deb ... Unpacking groff-base (1.24.1-1) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../08-bsdextrautils_2.42.2-4_armhf.deb ... Unpacking bsdextrautils (2.42.2-4) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../09-libpipeline1_1.5.8-3_armhf.deb ... Unpacking libpipeline1:armhf (1.5.8-3) ... Selecting previously unselected package man-db. Preparing to unpack .../10-man-db_2.13.1-1_armhf.deb ... Unpacking man-db (2.13.1-1) ... Selecting previously unselected package m4. Preparing to unpack .../11-m4_1.4.21-1_armhf.deb ... Unpacking m4 (1.4.21-1) ... Selecting previously unselected package autoconf. Preparing to unpack .../12-autoconf_2.73-2_all.deb ... Unpacking autoconf (2.73-2) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../13-autotools-dev_20240727.1+nmu1_all.deb ... Unpacking autotools-dev (20240727.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../14-automake_1%3a1.18.1-4_all.deb ... Unpacking automake (1:1.18.1-4) ... Selecting previously unselected package autopoint. Preparing to unpack .../15-autopoint_1.0-3_all.deb ... Unpacking autopoint (1.0-3) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../16-libdebhelper-perl_14.3_all.deb ... Unpacking libdebhelper-perl (14.3) ... Selecting previously unselected package libtool. Preparing to unpack .../17-libtool_2.6.2-2_all.deb ... Unpacking libtool (2.6.2-2) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../18-dh-autoreconf_22_all.deb ... Unpacking dh-autoreconf (22) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../19-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.15.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.15.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.15.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.15.1-1) ... Selecting previously unselected package libelf1t64:armhf. Preparing to unpack .../22-libelf1t64_0.195-1_armhf.deb ... Unpacking libelf1t64:armhf (0.195-1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.17-1_armhf.deb ... Unpacking dwz (0.17-1) ... Selecting previously unselected package libunistring5:armhf. Preparing to unpack .../24-libunistring5_1.4.2-1_armhf.deb ... Unpacking libunistring5:armhf (1.4.2-1) ... Selecting previously unselected package libxml2-16:armhf. Preparing to unpack .../25-libxml2-16_2.15.3+dfsg-1+b1_armhf.deb ... Unpacking libxml2-16:armhf (2.15.3+dfsg-1+b1) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_1.0-3_armhf.deb ... Unpacking gettext (1.0-3) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.22_all.deb ... Unpacking po-debconf (1.0.22) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_14.3_all.deb ... Unpacking debhelper (14.3) ... Selecting previously unselected package sgml-base. Preparing to unpack .../30-sgml-base_1.31+nmu1_all.deb ... Unpacking sgml-base (1.31+nmu1) ... Selecting previously unselected package xml-core. Preparing to unpack .../31-xml-core_0.21_all.deb ... Unpacking xml-core (0.21) ... Selecting previously unselected package docutils-common. Preparing to unpack .../32-docutils-common_0.23+dfsg-2_all.deb ... Unpacking docutils-common (0.23+dfsg-2) ... Selecting previously unselected package libfakechroot:armhf. Preparing to unpack .../33-libfakechroot_2.20.1+ds-18+b2_armhf.deb ... Unpacking libfakechroot:armhf (2.20.1+ds-18+b2) ... Selecting previously unselected package fakechroot. Preparing to unpack .../34-fakechroot_2.20.1+ds-18_all.deb ... Unpacking fakechroot (2.20.1+ds-18) ... Selecting previously unselected package libfakeroot:armhf. Preparing to unpack .../35-libfakeroot_2.1.4-1_armhf.deb ... Unpacking libfakeroot:armhf (2.1.4-1) ... Selecting previously unselected package fakeroot. Preparing to unpack .../36-fakeroot_2.1.4-1_armhf.deb ... Unpacking fakeroot (2.1.4-1) ... Selecting previously unselected package libtest-deep-perl. Preparing to unpack .../37-libtest-deep-perl_1.205-1_all.deb ... Unpacking libtest-deep-perl (1.205-1) ... Selecting previously unselected package python3-roman-numerals. Preparing to unpack .../38-python3-roman-numerals_4.1.0-1_all.deb ... Unpacking python3-roman-numerals (4.1.0-1) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../39-python3-docutils_0.23+dfsg-2_all.deb ... Unpacking python3-docutils (0.23+dfsg-2) ... Selecting previously unselected package sbuild-build-depends-main-dummy. Preparing to unpack .../40-sbuild-build-depends-main-dummy_0.invalid.0_armhf.deb ... Unpacking sbuild-build-depends-main-dummy (0.invalid.0) ... Setting up media-types (14.0.0) ... Setting up libpipeline1:armhf (1.5.8-3) ... Setting up bsdextrautils (2.42.2-4) ... Setting up libtest-deep-perl (1.205-1) ... Setting up libmagic-mgc (1:5.47-4) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libxml2-16:armhf (2.15.3+dfsg-1+b1) ... Setting up libfakechroot:armhf (2.20.1+ds-18+b2) ... Setting up libdebhelper-perl (14.3) ... Setting up libsqlite3-0:armhf (3.53.4-2) ... Setting up libmagic1t64:armhf (1:5.47-4) ... Setting up gettext-base (1.0-3) ... Setting up m4 (1.4.21-1) ... Setting up file (1:5.47-4) ... Setting up libfakeroot:armhf (2.1.4-1) ... Setting up libelf1t64:armhf (0.195-1) ... Setting up tzdata (2026c-1) ... Current default time zone: 'Etc/UTC' Local time is now: Fri Sep 4 14:53:53 UTC 2026. Universal Time is now: Fri Sep 4 14:53:53 UTC 2026. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up fakeroot (2.1.4-1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode Setting up autotools-dev (20240727.1+nmu1) ... Setting up fakechroot (2.20.1+ds-18) ... Setting up libunistring5:armhf (1.4.2-1) ... Setting up autopoint (1.0-3) ... Setting up libncursesw6:armhf (6.6+20260608-2) ... Setting up autoconf (2.73-2) ... Setting up libffi8:armhf (3.8.0-2) ... Setting up dwz (0.17-1) ... Setting up sensible-utils (0.0.26) ... Setting up libuchardet0:armhf (0.0.8-2+b2) ... Setting up netbase (6.6) ... Setting up sgml-base (1.31+nmu1) ... Setting up readline-common (8.3-4) ... Setting up automake (1:1.18.1-4) ... update-alternatives: using /usr/bin/automake-1.18 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.15.1-1) ... Setting up gettext (1.0-3) ... Setting up libtool (2.6.2-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (22) ... Setting up libreadline8t64:armhf (8.3-4) ... Setting up dh-strip-nondeterminism (1.15.1-1) ... Setting up groff-base (1.24.1-1) ... Setting up xml-core (0.21) ... Setting up libpython3.14-stdlib:armhf (3.14.7-1) ... Setting up po-debconf (1.0.22) ... Setting up man-db (2.13.1-1) ... Not building database; man-db/auto-update is not 'true'. Setting up python3.14 (3.14.7-1) ... Setting up libpython3-stdlib:armhf (3.14.7-3) ... Setting up debhelper (14.3) ... Setting up python3 (3.14.7-3) ... Setting up python3-roman-numerals (4.1.0-1) ... Processing triggers for libc-bin (2.43-4) ... Processing triggers for sgml-base (1.31+nmu1) ... Setting up docutils-common (0.23+dfsg-2) ... Processing triggers for sgml-base (1.31+nmu1) ... Setting up python3-docutils (0.23+dfsg-2) ... Setting up sbuild-build-depends-main-dummy (0.invalid.0) ... +------------------------------------------------------------------------------+ | Check architectures Fri, 04 Sep 2026 14:53:58 +0000 | +------------------------------------------------------------------------------+ Arch check ok (armhf included in any all) +------------------------------------------------------------------------------+ | Build environment Fri, 04 Sep 2026 14:53:59 +0000 | +------------------------------------------------------------------------------+ Kernel: Linux 6.1.0-48-arm64 #1 SMP Debian 6.1.172-1 (2026-05-15) arm64 (aarch64) Toolchain package versions: binutils_2.47-2 dpkg-dev_1.23.7+kali1 g++-15_15.3.0-2 gcc-15_15.3.0-2 libc6-dev_2.43-4 libstdc++-15-dev_15.3.0-2 libstdc++6_16.2.0-1 linux-libc-dev_7.1.5-1kali1 Package versions: apt_3.3.3+kali1 autoconf_2.73-2 automake_1:1.18.1-4 autopoint_1.0-3 autotools-dev_20240727.1+nmu1 base-files_1:2026.3.0 base-passwd_3.6.8 bash_5.3-3+b1 binutils_2.47-2 binutils-arm-linux-gnueabihf_2.47-2 binutils-common_2.47-2 bsdextrautils_2.42.2-4 build-essential_12.12 bzip2_1.0.8-6+b2 coreutils_9.10-1 cpp_4:15.2.0-5+b1 cpp-15_15.3.0-2 cpp-15-arm-linux-gnueabihf_15.3.0-2 cpp-arm-linux-gnueabihf_4:15.2.0-5+b1 dash_0.5.12-12 debconf_1.5.92 debhelper_14.3 debian-archive-keyring_2025.1 debianutils_5.24 dh-autoreconf_22 dh-strip-nondeterminism_1.15.1-1 diffutils_1:3.12-1 docutils-common_0.23+dfsg-2 dpkg_1.23.7+kali1 dpkg-dev_1.23.7+kali1 dwz_0.17-1 eatmydata_131-2 fakechroot_2.20.1+ds-18 fakeroot_2.1.4-1 file_1:5.47-4 findutils_4.11.0-2 g++_4:15.2.0-5+b1 g++-15_15.3.0-2 g++-15-arm-linux-gnueabihf_15.3.0-2 g++-arm-linux-gnueabihf_4:15.2.0-5+b1 gcc_4:15.2.0-5+b1 gcc-15_15.3.0-2 gcc-15-arm-linux-gnueabihf_15.3.0-2 gcc-15-base_15.3.0-2 gcc-16-base_16.2.0-1 gcc-arm-linux-gnueabihf_4:15.2.0-5+b1 gettext_1.0-3 gettext-base_1.0-3 grep_3.12-1 groff-base_1.24.1-1 gzip_1.14-1 hostname_3.25 init-system-helpers_1.69+kali1 intltool-debian_0.35.0+20060710.6 kali-archive-keyring_2025.2 libabsl20260526_20260526.0-2 libacl1_2.4.0-1 libapt-pkg7.0_3.3.3+kali1 libarchive-zip-perl_1.68-1 libasan8_16.2.0-1 libatomic1_16.2.0-1 libattr1_1:2.6.0-1 libaudit-common_1:4.1.2-1 libaudit1_1:4.1.2-1+b1 libbinutils_2.47-2 libblkid1_2.42.2-4 libbz2-1.0_1.0.8-6+b2 libc-bin_2.43-4 libc-dev-bin_2.43-4 libc-gconv-modules-extra_2.43-4 libc6_2.43-4 libc6-dev_2.43-4 libcap-ng0_0.9.3-1+b1 libcc1-0_16.2.0-1 libcrypt1_1:4.5.2+20251210-1 libctf-nobfd0_2.47-2 libctf0_2.47-2 libdb5.3t64_5.3.28+dfsg2-11+b1 libdebconfclient0_0.283 libdebhelper-perl_14.3 libdpkg-perl_1.23.7+kali1 libeatmydata1_131-2+b2 libelf1t64_0.195-1 libexpat1_2.8.3-1 libfakechroot_2.20.1+ds-18+b2 libfakeroot_2.1.4-1 libffi8_3.8.0-2 libfile-stripnondeterminism-perl_1.15.1-1 libgcc-15-dev_15.3.0-2 libgcc-s1_16.2.0-1 libgdbm-compat4t64_1.26-1+b2 libgdbm6t64_1.26-1+b2 libgmp10_2:6.3.0+dfsg-5+b2 libgomp1_16.2.0-1 libhogweed6t64_3.10.2-1+b1 libisl23_0.28-1 libjansson4_2.15.1-1 liblz4-1_1.10.0-10 liblzma5_5.8.3-1 libmagic-mgc_1:5.47-4 libmagic1t64_1:5.47-4 libmd0_1.2.0-2 libmount1_2.42.2-4 libmpc3_1.3.1-3 libmpfr6_4.2.2-3 libncursesw6_6.6+20260608-2 libnettle8t64_3.10.2-1+b1 libpam-modules_1.7.0-8 libpam-modules-bin_1.7.0-8 libpam-runtime_1.7.0-8 libpam0g_1.7.0-8 libpcre2-8-0_10.46-1+b2 libperl5.42_5.42.3-1 libpipeline1_1.5.8-3 libpython3-stdlib_3.14.7-3 libpython3.14-minimal_3.14.7-1 libpython3.14-stdlib_3.14.7-1 libre-engine-re2-perl_0.18+ds-3+b4 libre2-11_20251105-1+b2 libreadline8t64_8.3-4 libseccomp2_2.6.1-1+b1 libselinux1_3.11-2 libsframe3_2.47-2 libsmartcols1_2.42.2-4 libsqlite3-0_3.53.4-2 libssl3t64_3.6.3-1 libstdc++-15-dev_15.3.0-2 libstdc++6_16.2.0-1 libsystemd0_261.2-1 libtest-deep-perl_1.205-1 libtinfo6_6.6+20260608-2 libtool_2.6.2-2 libubsan1_16.2.0-1 libuchardet0_0.0.8-2+b2 libudev1_261.2-1 libunistring5_1.4.2-1 libuuid1_2.42.2-4 libxml2-16_2.15.3+dfsg-1+b1 libxxhash0_0.8.3-2+b2 libzstd1_1.5.7+dfsg-4 linux-libc-dev_7.1.5-1kali1 m4_1.4.21-1 make_4.4.1-3 man-db_2.13.1-1 mawk_1.3.4.20260302-1 media-types_14.0.0 ncurses-base_6.6+20260608-2 ncurses-bin_6.6+20260608-2 netbase_6.6 openssl-provider-legacy_3.6.3-1 patch_2.8-2 perl_5.42.3-1 perl-base_5.42.3-1 perl-modules-5.42_5.42.3-1 po-debconf_1.0.22 policy-rcd-declarative_0.6 policy-rcd-declarative-deny-all_0.6 python3_3.14.7-3 python3-docutils_0.23+dfsg-2 python3-minimal_3.14.7-3 python3-roman-numerals_4.1.0-1 python3.14_3.14.7-1 python3.14-minimal_3.14.7-1 readline-common_8.3-4 sbuild-build-depends-main-dummy_0.invalid.0 sed_4.9-3 sensible-utils_0.0.26 sgml-base_1.31+nmu1 sqv_1.4.0-1 sysvinit-utils_3.18-1 tar_1.35+dfsg-5 tzdata_2026c-1 util-linux_2.42.2-4 xml-core_0.21 xz-utils_5.8.3-1 zlib1g_1:1.3.dfsg+really1.3.2-3 +------------------------------------------------------------------------------+ | Build Fri, 04 Sep 2026 14:53:59 +0000 | +------------------------------------------------------------------------------+ Unpack source ------------- -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (native) Source: init-system-helpers Binary: init-system-helpers, init Architecture: any all Version: 1.69+nmu1+kali1 Maintainer: Kali Developers Uploaders: Michael Biebl , Martin Pitt , Felipe Sateler , Luca Boccassi Standards-Version: 4.7.0 Vcs-Browser: https://gitlab.com/kalilinux/packages/init-system-helpers Vcs-Git: https://gitlab.com/kalilinux/packages/init-system-helpers.git Testsuite: autopkgtest Testsuite-Triggers: build-essential, fakechroot, fakeroot, libtest-deep-perl Build-Depends: debhelper-compat (= 13), fakeroot [!hurd-amd64 !hurd-i386 !ia64 !kfreebsd-amd64 !kfreebsd-i386 !x32] , fakechroot [!hurd-amd64 !hurd-i386 !ia64 !kfreebsd-amd64 !kfreebsd-i386 !x32] , libtest-deep-perl , perl:any, python3-docutils Package-List: init deb metapackages important arch=any protected=yes init-system-helpers deb admin required arch=all essential=yes Checksums-Sha1: c7f97f6459edcfefd2103e7823315deb70adbf2d 48216 init-system-helpers_1.69+nmu1+kali1.tar.xz Checksums-Sha256: 04416b939aa01c7c9e7961a3e530e5dceb9021f3471865a3d5543cbaed4b8506 48216 init-system-helpers_1.69+nmu1+kali1.tar.xz Files: cfd8321a7b611906fe930377873730ba 48216 init-system-helpers_1.69+nmu1+kali1.tar.xz Debian-Vcs-Browser: https://salsa.debian.org/debian/init-system-helpers Debian-Vcs-Git: https://salsa.debian.org/debian/init-system-helpers.git Original-Maintainer: Debian systemd Maintainers -----BEGIN PGP SIGNATURE----- Comment: Signed by Sophie Brun iHUEARYKAB0WIQT+vxv1zHPi+qsoK1z+ZsWMCX9qbgUCapra6gAKCRD+ZsWMCX9q bvWhAQCYHJrys3XHzUkpCnU/gBnHI954H/AeEtWl8/6G3CFLIQEAtdb5onolF1US 7CJ/WYK2HQv51LhIHufJMbqTLsV6wAk= =W5iq -----END PGP SIGNATURE----- dpkg-source: warning: cannot verify inline signature for ./init-system-helpers_1.69+nmu1+kali1.dsc: missing OpenPGP keyrings dpkg-source: info: verifying ./init-system-helpers_1.69+nmu1+kali1.dsc dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-keyring.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-tag2upload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-nonupload.pgp dpkg-source: info: skipping absent keyring /usr/share/keyrings/debian-maintainers.pgp dpkg-source: info: extracting init-system-helpers in /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1 dpkg-source: info: unpacking init-system-helpers_1.69+nmu1+kali1.tar.xz clean up apt cache ------------------ Check disk space ---------------- Sufficient free space for build User Environment ---------------- APT_CONFIG=/var/lib/sbuild/apt.conf DEB_BUILD_OPTIONS=parallel=8 HOME=/sbuild-nonexistent LANG=C.UTF-8 LC_ALL=C.UTF-8 LOGNAME=sbuild PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games SHELL=/bin/sh USER=sbuild dpkg-buildpackage ----------------- Command: dpkg-buildpackage --sanitize-env -us -uc -B dpkg-buildpackage: info: source package init-system-helpers dpkg-buildpackage: info: source version 1.69+nmu1+kali1 dpkg-buildpackage: info: source distribution kali-dev dpkg-buildpackage: info: source changed by Sophie Brun dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean dh_clean debian/rules binary-arch dh binary-arch dh_update_autotools_config -a dh_autoreconf -a debian/rules execute_after_dh_auto_build make[1]: Entering directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' set -e ; \ for file in script/deb-*; do \ pod2man --section=1p --utf8 --center="init-system-helpers" --release=1.69+nmu1+kali1 $file $file.1p; \ done set -e ; \ for file in man8/*.rst ; do \ rst2man $file ${file%.rst}.8 ; \ done make[1]: Leaving directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' debian/rules override_dh_auto_test make[1]: Entering directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' # test with fakechroot set -eu; \ for test in t/*.t; do \ echo "======== $(basename $test) (fakechroot) ======="; \ fakechroot fakeroot perl $test; \ done ======== 001-deb-systemd-helper.t (fakechroot) ======= test_setup() with fakechroot /usr/bin/deb-systemd-helper: error: unable to read unit\x2dLhgZw.service ok 1 - deb-systemd-helper could be executed ok 2 - deb-systemd-helper did not exit due to a signal ok 3 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 4 - deb-systemd-helper could be executed ok 5 - deb-systemd-helper did not exit due to a signal ok 6 - random unit file 'unit\x2dLhgZw.service' isnt debian-installed disabled ok 7 - deb-systemd-helper could be executed ok 8 - deb-systemd-helper did not exit due to a signal ok 9 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 10 - deb-systemd-helper could be executed ok 11 - deb-systemd-helper did not exit due to a signal ok 12 - random unit file 'unit\x2dLhgZw.service' isnt debian-installed ok 13 - multi-user.target.wants does not exist yet ok 14 - enable command succeeded ok 15 - unit\x2dLhgZw.service was enabled ok 16 - symlink points to /lib/systemd/system/unit\x2dLhgZw.service enabled ok 17 - deb-systemd-helper could be executed ok 18 - deb-systemd-helper did not exit due to a signal ok 19 - random unit file 'unit\x2dLhgZw.service' is is-enabled ok 20 - deb-systemd-helper could be executed ok 21 - deb-systemd-helper did not exit due to a signal ok 22 - random unit file 'unit\x2dLhgZw.service' is debian-installed ok 23 - symlink deleted disabled ok 24 - deb-systemd-helper could be executed ok 25 - deb-systemd-helper did not exit due to a signal ok 26 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 27 - deb-systemd-helper could be executed ok 28 - deb-systemd-helper did not exit due to a signal ok 29 - random unit file 'unit\x2dLhgZw.service' is debian-installed ok 30 - enable command succeeded disabled ok 31 - deb-systemd-helper could be executed ok 32 - deb-systemd-helper did not exit due to a signal ok 33 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 34 - state file exists ok 35 - disable command succeeded ok 36 - state file does not exist anymore after purging ok 37 - deb-systemd-helper could be executed ok 38 - deb-systemd-helper did not exit due to a signal ok 39 - random unit file 'unit\x2dLhgZw.service' isnt debian-installed ok 40 - symlink does not exist yet disabled ok 41 - deb-systemd-helper could be executed ok 42 - deb-systemd-helper did not exit due to a signal ok 43 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 44 - enable command succeeded enabled ok 45 - deb-systemd-helper could be executed ok 46 - deb-systemd-helper did not exit due to a signal ok 47 - random unit file 'unit\x2dLhgZw.service' is is-enabled ok 48 - deb-systemd-helper could be executed ok 49 - deb-systemd-helper did not exit due to a signal ok 50 - random unit file 'unit\x2dLhgZw.service' is debian-installed ok 51 - disable command succeeded disabled ok 52 - deb-systemd-helper could be executed ok 53 - deb-systemd-helper did not exit due to a signal ok 54 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 55 - symlink does not exist yet disabled ok 56 - deb-systemd-helper could be executed ok 57 - deb-systemd-helper did not exit due to a signal ok 58 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 59 - enable command succeeded enabled ok 60 - deb-systemd-helper could be executed ok 61 - deb-systemd-helper did not exit due to a signal ok 62 - random unit file 'unit\x2dLhgZw.service' is is-enabled ok 63 - deb-systemd-helper could be executed ok 64 - deb-systemd-helper did not exit due to a signal ok 65 - random unit file 'unit\x2dLhgZw.service' is debian-installed ok 66 - purge command succeeded disabled ok 67 - deb-systemd-helper could be executed ok 68 - deb-systemd-helper did not exit due to a signal ok 69 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 70 - deb-systemd-helper could be executed ok 71 - deb-systemd-helper did not exit due to a signal ok 72 - random unit file 'unit\x2dLhgZw.service' isnt debian-installed ok 73 - symlink does not exist yet disabled ok 74 - deb-systemd-helper could be executed ok 75 - deb-systemd-helper did not exit due to a signal ok 76 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 77 - enable command succeeded enabled ok 78 - deb-systemd-helper could be executed ok 79 - deb-systemd-helper did not exit due to a signal ok 80 - random unit file 'unit\x2dLhgZw.service' is is-enabled ok 81 - deb-systemd-helper could be executed ok 82 - deb-systemd-helper did not exit due to a signal ok 83 - random unit file 'unit\x2dLhgZw.service' is debian-installed ok 84 - mask link does not exist yet ok 85 - mask command succeeded ok 86 - mask link exists ok 87 - service masked ok 88 - unmask command succeeded ok 89 - mask link does not exist anymore ok 90 - disable command succeeded ok 91 - symlink no longer exists ok 92 - mask command succeeded ok 93 - mask link exists ok 94 - service masked ok 95 - unmask command succeeded ok 96 - symlink no longer exists ok 97 - mask link does not exist yet ok 98 - mask link exists ok 99 - service masked ok 100 - mask command succeeded ok 101 - mask link exists ok 102 - service still masked ok 103 - unmask command succeeded ok 104 - mask link exists ok 105 - service still masked ok 106 - local service file exists ok 107 - local service file is not a symlink ok 108 - deb-systemd-helper could be executed ok 109 - deb-systemd-helper did not exit due to a signal ok 110 - deb-systemd-helper exited with exit code 0 ok 111 - local service file still exists ok 112 - local service file is still not a symlink ok 113 - deb-systemd-helper could be executed ok 114 - deb-systemd-helper did not exit due to a signal ok 115 - deb-systemd-helper exited with exit code 0 ok 116 - local service file still exists ok 117 - local service file is still not a symlink ok 118 - purge command succeeded disabled ok 119 - deb-systemd-helper could be executed ok 120 - deb-systemd-helper did not exit due to a signal ok 121 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest.service ok 122 - deb-systemd-helper could be executed ok 123 - deb-systemd-helper did not exit due to a signal ok 124 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 125 - alias link does not exist yet ok 126 - enable command succeeded ok 127 - correct alias link enabled ok 128 - deb-systemd-helper could be executed ok 129 - deb-systemd-helper did not exit due to a signal ok 130 - random unit file 'unit\x2dLhgZw.service' is is-enabled ok 131 - mask link does not exist yet ok 132 - mask command succeeded ok 133 - correct alias link ok 134 - service masked ok 135 - unmask command succeeded ok 136 - correct alias link ok 137 - mask link does not exist any more disabled ok 138 - deb-systemd-helper could be executed ok 139 - deb-systemd-helper did not exit due to a signal ok 140 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 141 - alias link does not exist any more ok 142 - purge command succeeded ok 143 - enable command succeeded ok 144 - correct alias link ok 145 - mask command succeeded with uninstalled unit ok 146 - correct alias link ok 147 - service masked ok 148 - purge command succeeded with uninstalled unit ok 149 - alias link does not exist any more ok 150 - service masked ok 151 - unmask command succeeded with uninstalled unit ok 152 - mask link does not exist any more disabled ok 153 - deb-systemd-helper could be executed ok 154 - deb-systemd-helper did not exit due to a signal ok 155 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest.service ok 156 - deb-systemd-helper could be executed ok 157 - deb-systemd-helper did not exit due to a signal ok 158 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 159 - enable command succeeded enabled ok 160 - deb-systemd-helper could be executed ok 161 - deb-systemd-helper did not exit due to a signal ok 162 - random unit file 'unit\x2dLhgZw.service' is is-enabled ok 163 - mask command succeeded ok 164 - service masked ok 165 - unmask command succeeded ok 166 - mask link does not exist any more /usr/bin/deb-systemd-helper: error: unable to read unit\x2dLhgZw.service ok 167 - deb-systemd-helper could be executed ok 168 - deb-systemd-helper did not exit due to a signal ok 169 - random unit file 'unit\x2dLhgZw.service' isnt is-enabled ok 170 - mask link does not exist any more disabled ok 171 - deb-systemd-helper could be executed ok 172 - deb-systemd-helper did not exit due to a signal ok 173 - random unit file 'unit\x2dB7w4u@.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest@.service ok 174 - deb-systemd-helper could be executed ok 175 - deb-systemd-helper did not exit due to a signal ok 176 - random unit file 'foo\x2dtest@.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest@instance\x2d.service ok 177 - deb-systemd-helper could be executed ok 178 - deb-systemd-helper did not exit due to a signal ok 179 - random unit file 'foo\x2dtest@instance\x2d.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dbar@baz.service ok 180 - deb-systemd-helper could be executed ok 181 - deb-systemd-helper did not exit due to a signal ok 182 - random unit file 'foo\x2dbar@baz.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dbar@instance\x2d.service ok 183 - deb-systemd-helper could be executed ok 184 - deb-systemd-helper did not exit due to a signal ok 185 - random unit file 'foo\x2dbar@instance\x2d.service' isnt is-enabled ok 186 - template alias link does not exist yet ok 187 - instance alias link does not exist yet ok 188 - template wanted link does not exist yet ok 189 - instance wanted link does not exist yet ok 190 - enable command succeeded ok 191 - correct template alias link ok 192 - correct instance alias link ok 193 - template wanted link does still not exist ok 194 - correct instance wanted link enabled ok 195 - deb-systemd-helper could be executed ok 196 - deb-systemd-helper did not exit due to a signal ok 197 - random unit file 'unit\x2dB7w4u@.service' is is-enabled disabled ok 198 - deb-systemd-helper could be executed ok 199 - deb-systemd-helper did not exit due to a signal ok 200 - random unit file 'unit\x2dB7w4u@.service' isnt is-enabled ok 201 - template alias link does not exist anymore ok 202 - instance alias link does not exist anymore ok 203 - template wanted link does still not exist ok 204 - instance wanted link does not exist anymore disabled ok 205 - deb-systemd-helper could be executed ok 206 - deb-systemd-helper did not exit due to a signal ok 207 - random unit file 'unit\x2dB7w4u@.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest@.service ok 208 - deb-systemd-helper could be executed ok 209 - deb-systemd-helper did not exit due to a signal ok 210 - random unit file 'foo\x2dtest@.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dbar@baz.service ok 211 - deb-systemd-helper could be executed ok 212 - deb-systemd-helper did not exit due to a signal ok 213 - random unit file 'foo\x2dbar@baz.service' isnt is-enabled ok 214 - template alias link does not exist yet ok 215 - instance alias link does not exist yet ok 216 - template wanted link does not exist yet ok 217 - instance wanted link does not exist yet ok 218 - enable command succeeded ok 219 - correct template alias link ok 220 - correct instance alias link ok 221 - correct template wanted link ok 222 - instance wanted link does still not exist enabled ok 223 - deb-systemd-helper could be executed ok 224 - deb-systemd-helper did not exit due to a signal ok 225 - random unit file 'unit\x2dB7w4u@.service' is is-enabled disabled ok 226 - deb-systemd-helper could be executed ok 227 - deb-systemd-helper did not exit due to a signal ok 228 - random unit file 'unit\x2dB7w4u@.service' isnt is-enabled ok 229 - template alias link does not exist anymore ok 230 - instance alias link does not exist anymore ok 231 - template wanted link does still not exist ok 232 - instance wanted link does not exist anymore 1..232 ======== 002-deb-systemd-helper-update.t (fakechroot) ======= test_setup() with fakechroot ok 1 - units0kAm.service was enabled ok 2 - symlink points to /lib/systemd/system/units0kAm.service enabled ok 3 - deb-systemd-helper could be executed ok 4 - deb-systemd-helper did not exit due to a signal ok 5 - random unit file 'units0kAm.service' is is-enabled disabled ok 6 - deb-systemd-helper could be executed ok 7 - deb-systemd-helper did not exit due to a signal ok 8 - random unit file 'units0kAm.service' isnt is-enabled enabled ok 9 - deb-systemd-helper could be executed ok 10 - deb-systemd-helper did not exit due to a signal ok 11 - random unit file was-enabled ok 12 - state file does not contain the new link yet ok 13 - new symlink does not exist yet ok 14 - new symlink was created ok 15 - symlink points to /lib/systemd/system/units0kAm.service enabled ok 16 - deb-systemd-helper could be executed ok 17 - deb-systemd-helper did not exit due to a signal ok 18 - random unit file 'units0kAm.service' is is-enabled ok 19 - state file updated disabled ok 20 - deb-systemd-helper could be executed ok 21 - deb-systemd-helper did not exit due to a signal ok 22 - random unit file 'units0kAm.service' isnt is-enabled enabled ok 23 - deb-systemd-helper could be executed ok 24 - deb-systemd-helper did not exit due to a signal ok 25 - random unit file was-enabled ok 26 - state file does not contain the new link yet ok 27 - new symlink does not exist yet ok 28 - new symlink still does not exist disabled ok 29 - deb-systemd-helper could be executed ok 30 - deb-systemd-helper did not exit due to a signal ok 31 - random unit file 'units0kAm.service' isnt is-enabled ok 32 - state file updated ok 33 - new symlink still does not exist ok 34 - new symlink 2 still does not exist ok 35 - new symlink still does not exist ok 36 - new symlink 2 still does not exist enabled ok 37 - deb-systemd-helper could be executed ok 38 - deb-systemd-helper did not exit due to a signal ok 39 - random unit file 'units0kAm.service' is is-enabled ok 40 - state file updated 1..40 ======== 003-deb-systemd-helper-complex.t (fakechroot) ======= test_setup() with fakechroot disabled ok 1 - deb-systemd-helper could be executed ok 2 - deb-systemd-helper did not exit due to a signal ok 3 - random unit file 'unit8Keq1.service' isnt is-enabled disabled ok 4 - deb-systemd-helper could be executed ok 5 - deb-systemd-helper did not exit due to a signal ok 6 - random unit file 'unitUfEcY.service' isnt is-enabled ok 7 - deb-systemd-helper could be executed ok 8 - deb-systemd-helper did not exit due to a signal ok 9 - random unit file 'unit8Keq1.service' isnt debian-installed ok 10 - deb-systemd-helper could be executed ok 11 - deb-systemd-helper did not exit due to a signal ok 12 - random unit file 'unitUfEcY.service' isnt debian-installed ok 13 - multi-user.target.wants does not exist yet ok 14 - All expected links present ok 15 - alias created ok 16 - alias points to the correct service file ok 17 - state file updated enabled ok 18 - deb-systemd-helper could be executed ok 19 - deb-systemd-helper did not exit due to a signal ok 20 - random unit file 'unit8Keq1.service' is is-enabled enabled ok 21 - deb-systemd-helper could be executed ok 22 - deb-systemd-helper did not exit due to a signal ok 23 - random unit file 'unitUfEcY.service' is is-enabled ok 24 - deb-systemd-helper could be executed ok 25 - deb-systemd-helper did not exit due to a signal ok 26 - random unit file 'unit8Keq1.service' is debian-installed ok 27 - deb-systemd-helper could be executed ok 28 - deb-systemd-helper did not exit due to a signal ok 29 - random unit file 'unitUfEcY.service' isnt debian-installed 1..29 ======== 004-deb-systemd-helper-user.t (fakechroot) ======= test_setup() with fakechroot /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 1 - deb-systemd-helper could be executed ok 2 - deb-systemd-helper did not exit due to a signal ok 3 - random unit file 'unit\x2d27bxd.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 4 - deb-systemd-helper could be executed ok 5 - deb-systemd-helper did not exit due to a signal ok 6 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 7 - deb-systemd-helper could be executed ok 8 - deb-systemd-helper did not exit due to a signal ok 9 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 10 - deb-systemd-helper could be executed ok 11 - deb-systemd-helper did not exit due to a signal ok 12 - random unit file 'unit\x2d27bxd.service' isnt debian-installed /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 13 - deb-systemd-helper could be executed ok 14 - deb-systemd-helper did not exit due to a signal ok 15 - random unit file 'unit\x2d27bxd.service' isnt is-enabled disabled ok 16 - deb-systemd-helper could be executed ok 17 - deb-systemd-helper did not exit due to a signal ok 18 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 19 - deb-systemd-helper could be executed ok 20 - deb-systemd-helper did not exit due to a signal ok 21 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 22 - deb-systemd-helper could be executed ok 23 - deb-systemd-helper did not exit due to a signal ok 24 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 25 - default.target.wants does not exist yet ok 26 - enable command succeeded ok 27 - unit\x2d27bxd.service was enabled ok 28 - symlink points to /usr/lib/systemd/user/unit\x2d27bxd.service /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 29 - deb-systemd-helper could be executed ok 30 - deb-systemd-helper did not exit due to a signal ok 31 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 32 - deb-systemd-helper could be executed ok 33 - deb-systemd-helper did not exit due to a signal ok 34 - random unit file 'unit\x2d27bxd.service' isnt debian-installed enabled ok 35 - deb-systemd-helper could be executed ok 36 - deb-systemd-helper did not exit due to a signal ok 37 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 38 - deb-systemd-helper could be executed ok 39 - deb-systemd-helper did not exit due to a signal ok 40 - random unit file 'unit\x2d27bxd.service' is debian-installed ok 41 - symlink deleted /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 42 - deb-systemd-helper could be executed ok 43 - deb-systemd-helper did not exit due to a signal ok 44 - random unit file 'unit\x2d27bxd.service' isnt is-enabled disabled ok 45 - deb-systemd-helper could be executed ok 46 - deb-systemd-helper did not exit due to a signal ok 47 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 48 - deb-systemd-helper could be executed ok 49 - deb-systemd-helper did not exit due to a signal ok 50 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 51 - deb-systemd-helper could be executed ok 52 - deb-systemd-helper did not exit due to a signal ok 53 - random unit file 'unit\x2d27bxd.service' is debian-installed ok 54 - enable command succeeded disabled ok 55 - deb-systemd-helper could be executed ok 56 - deb-systemd-helper did not exit due to a signal ok 57 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 58 - state file exists ok 59 - disable command succeeded ok 60 - state file does not exist anymore after purging ok 61 - deb-systemd-helper could be executed ok 62 - deb-systemd-helper did not exit due to a signal ok 63 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 64 - deb-systemd-helper could be executed ok 65 - deb-systemd-helper did not exit due to a signal ok 66 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 67 - symlink does not exist yet /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 68 - deb-systemd-helper could be executed ok 69 - deb-systemd-helper did not exit due to a signal ok 70 - random unit file 'unit\x2d27bxd.service' isnt is-enabled disabled ok 71 - deb-systemd-helper could be executed ok 72 - deb-systemd-helper did not exit due to a signal ok 73 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 74 - enable command succeeded /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 75 - deb-systemd-helper could be executed ok 76 - deb-systemd-helper did not exit due to a signal ok 77 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 78 - deb-systemd-helper could be executed ok 79 - deb-systemd-helper did not exit due to a signal ok 80 - random unit file 'unit\x2d27bxd.service' isnt debian-installed enabled ok 81 - deb-systemd-helper could be executed ok 82 - deb-systemd-helper did not exit due to a signal ok 83 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 84 - deb-systemd-helper could be executed ok 85 - deb-systemd-helper did not exit due to a signal ok 86 - random unit file 'unit\x2d27bxd.service' is debian-installed ok 87 - disable command succeeded /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 88 - deb-systemd-helper could be executed ok 89 - deb-systemd-helper did not exit due to a signal ok 90 - random unit file 'unit\x2d27bxd.service' isnt is-enabled disabled ok 91 - deb-systemd-helper could be executed ok 92 - deb-systemd-helper did not exit due to a signal ok 93 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 94 - symlink does not exist yet /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 95 - deb-systemd-helper could be executed ok 96 - deb-systemd-helper did not exit due to a signal ok 97 - random unit file 'unit\x2d27bxd.service' isnt is-enabled disabled ok 98 - deb-systemd-helper could be executed ok 99 - deb-systemd-helper did not exit due to a signal ok 100 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 101 - enable command succeeded /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 102 - deb-systemd-helper could be executed ok 103 - deb-systemd-helper did not exit due to a signal ok 104 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 105 - deb-systemd-helper could be executed ok 106 - deb-systemd-helper did not exit due to a signal ok 107 - random unit file 'unit\x2d27bxd.service' isnt debian-installed enabled ok 108 - deb-systemd-helper could be executed ok 109 - deb-systemd-helper did not exit due to a signal ok 110 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 111 - deb-systemd-helper could be executed ok 112 - deb-systemd-helper did not exit due to a signal ok 113 - random unit file 'unit\x2d27bxd.service' is debian-installed ok 114 - purge command succeeded disabled ok 115 - deb-systemd-helper could be executed ok 116 - deb-systemd-helper did not exit due to a signal ok 117 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 118 - deb-systemd-helper could be executed ok 119 - deb-systemd-helper did not exit due to a signal ok 120 - random unit file 'unit\x2d27bxd.service' isnt debian-installed ok 121 - symlink does not exist yet disabled ok 122 - deb-systemd-helper could be executed ok 123 - deb-systemd-helper did not exit due to a signal ok 124 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 125 - enable command succeeded enabled ok 126 - deb-systemd-helper could be executed ok 127 - deb-systemd-helper did not exit due to a signal ok 128 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 129 - deb-systemd-helper could be executed ok 130 - deb-systemd-helper did not exit due to a signal ok 131 - random unit file 'unit\x2d27bxd.service' is debian-installed ok 132 - mask link does not exist yet ok 133 - mask command succeeded ok 134 - mask link exists ok 135 - service masked ok 136 - unmask command succeeded ok 137 - mask link does not exist anymore ok 138 - disable command succeeded ok 139 - symlink no longer exists ok 140 - mask command succeeded ok 141 - mask link exists ok 142 - service masked ok 143 - unmask command succeeded ok 144 - symlink no longer exists ok 145 - mask link does not exist yet ok 146 - mask link exists ok 147 - service masked ok 148 - mask command succeeded ok 149 - mask link exists ok 150 - service still masked ok 151 - unmask command succeeded ok 152 - mask link exists ok 153 - service still masked ok 154 - local service file exists ok 155 - local service file is not a symlink ok 156 - deb-systemd-helper could be executed ok 157 - deb-systemd-helper did not exit due to a signal ok 158 - deb-systemd-helper exited with exit code 0 ok 159 - local service file still exists ok 160 - local service file is still not a symlink ok 161 - deb-systemd-helper could be executed ok 162 - deb-systemd-helper did not exit due to a signal ok 163 - deb-systemd-helper exited with exit code 0 ok 164 - local service file still exists ok 165 - local service file is still not a symlink ok 166 - purge command succeeded disabled ok 167 - deb-systemd-helper could be executed ok 168 - deb-systemd-helper did not exit due to a signal ok 169 - random unit file 'unit\x2d27bxd.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest.service ok 170 - deb-systemd-helper could be executed ok 171 - deb-systemd-helper did not exit due to a signal ok 172 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 173 - alias link does not exist yet ok 174 - enable command succeeded ok 175 - correct alias link enabled ok 176 - deb-systemd-helper could be executed ok 177 - deb-systemd-helper did not exit due to a signal ok 178 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 179 - mask link does not exist yet ok 180 - mask command succeeded ok 181 - correct alias link ok 182 - service masked ok 183 - unmask command succeeded ok 184 - correct alias link ok 185 - mask link does not exist any more disabled ok 186 - deb-systemd-helper could be executed ok 187 - deb-systemd-helper did not exit due to a signal ok 188 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 189 - alias link does not exist any more ok 190 - purge command succeeded ok 191 - enable command succeeded ok 192 - correct alias link ok 193 - mask command succeeded with uninstalled unit ok 194 - correct alias link ok 195 - service masked ok 196 - purge command succeeded with uninstalled unit ok 197 - alias link does not exist any more ok 198 - service masked ok 199 - unmask command succeeded with uninstalled unit ok 200 - mask link does not exist any more disabled ok 201 - deb-systemd-helper could be executed ok 202 - deb-systemd-helper did not exit due to a signal ok 203 - random unit file 'unit\x2d27bxd.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read foo\x2dtest.service ok 204 - deb-systemd-helper could be executed ok 205 - deb-systemd-helper did not exit due to a signal ok 206 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 207 - enable command succeeded enabled ok 208 - deb-systemd-helper could be executed ok 209 - deb-systemd-helper did not exit due to a signal ok 210 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 211 - mask command succeeded ok 212 - service masked ok 213 - unmask command succeeded ok 214 - mask link does not exist any more /usr/bin/deb-systemd-helper: error: unable to read unit\x2d27bxd.service ok 215 - deb-systemd-helper could be executed ok 216 - deb-systemd-helper did not exit due to a signal ok 217 - random unit file 'unit\x2d27bxd.service' isnt is-enabled ok 218 - mask link does not exist any more disabled ok 219 - deb-systemd-helper could be executed ok 220 - deb-systemd-helper did not exit due to a signal ok 221 - random unit file 'unit\x2d27bxd.service' isnt is-enabled /usr/bin/deb-systemd-helper: error: unable to read baz\x2dtest.service ok 222 - deb-systemd-helper could be executed ok 223 - deb-systemd-helper did not exit due to a signal ok 224 - random unit file 'baz\x2dtest.service' isnt is-enabled ok 225 - alias link does not exist yet ok 226 - enable command succeeded enabled ok 227 - deb-systemd-helper could be executed ok 228 - deb-systemd-helper did not exit due to a signal ok 229 - random unit file 'unit\x2d27bxd.service' is is-enabled ok 230 - alias link does exist ok 231 - correct alias link 1..231 # test with DPKG_ROOT set -eu; \ for test in t/*.t; do \ echo "======== $(basename $test) (DPKG_ROOT) ======="; \ TEST_DPKG_ROOT=1 perl $test; \ done ======== 001-deb-systemd-helper.t (DPKG_ROOT) ======= test_setup() with DPKG_ROOT /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8unit\x2dbICoJ.service ok 1 - deb-systemd-helper could be executed ok 2 - deb-systemd-helper did not exit due to a signal ok 3 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 4 - deb-systemd-helper could be executed ok 5 - deb-systemd-helper did not exit due to a signal ok 6 - random unit file 'unit\x2dbICoJ.service' isnt debian-installed disabled ok 7 - deb-systemd-helper could be executed ok 8 - deb-systemd-helper did not exit due to a signal ok 9 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 10 - deb-systemd-helper could be executed ok 11 - deb-systemd-helper did not exit due to a signal ok 12 - random unit file 'unit\x2dbICoJ.service' isnt debian-installed ok 13 - multi-user.target.wants does not exist yet ok 14 - enable command succeeded ok 15 - unit\x2dbICoJ.service was enabled ok 16 - symlink points to /tmp/tTLQ4_omZ8/lib/systemd/system/unit\x2dbICoJ.service enabled ok 17 - deb-systemd-helper could be executed ok 18 - deb-systemd-helper did not exit due to a signal ok 19 - random unit file 'unit\x2dbICoJ.service' is is-enabled ok 20 - deb-systemd-helper could be executed ok 21 - deb-systemd-helper did not exit due to a signal ok 22 - random unit file 'unit\x2dbICoJ.service' is debian-installed ok 23 - symlink deleted disabled ok 24 - deb-systemd-helper could be executed ok 25 - deb-systemd-helper did not exit due to a signal ok 26 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 27 - deb-systemd-helper could be executed ok 28 - deb-systemd-helper did not exit due to a signal ok 29 - random unit file 'unit\x2dbICoJ.service' is debian-installed ok 30 - enable command succeeded disabled ok 31 - deb-systemd-helper could be executed ok 32 - deb-systemd-helper did not exit due to a signal ok 33 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 34 - state file exists ok 35 - disable command succeeded ok 36 - state file does not exist anymore after purging ok 37 - deb-systemd-helper could be executed ok 38 - deb-systemd-helper did not exit due to a signal ok 39 - random unit file 'unit\x2dbICoJ.service' isnt debian-installed ok 40 - symlink does not exist yet disabled ok 41 - deb-systemd-helper could be executed ok 42 - deb-systemd-helper did not exit due to a signal ok 43 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 44 - enable command succeeded enabled ok 45 - deb-systemd-helper could be executed ok 46 - deb-systemd-helper did not exit due to a signal ok 47 - random unit file 'unit\x2dbICoJ.service' is is-enabled ok 48 - deb-systemd-helper could be executed ok 49 - deb-systemd-helper did not exit due to a signal ok 50 - random unit file 'unit\x2dbICoJ.service' is debian-installed ok 51 - disable command succeeded disabled ok 52 - deb-systemd-helper could be executed ok 53 - deb-systemd-helper did not exit due to a signal ok 54 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 55 - symlink does not exist yet disabled ok 56 - deb-systemd-helper could be executed ok 57 - deb-systemd-helper did not exit due to a signal ok 58 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 59 - enable command succeeded enabled ok 60 - deb-systemd-helper could be executed ok 61 - deb-systemd-helper did not exit due to a signal ok 62 - random unit file 'unit\x2dbICoJ.service' is is-enabled ok 63 - deb-systemd-helper could be executed ok 64 - deb-systemd-helper did not exit due to a signal ok 65 - random unit file 'unit\x2dbICoJ.service' is debian-installed ok 66 - purge command succeeded disabled ok 67 - deb-systemd-helper could be executed ok 68 - deb-systemd-helper did not exit due to a signal ok 69 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 70 - deb-systemd-helper could be executed ok 71 - deb-systemd-helper did not exit due to a signal ok 72 - random unit file 'unit\x2dbICoJ.service' isnt debian-installed ok 73 - symlink does not exist yet disabled ok 74 - deb-systemd-helper could be executed ok 75 - deb-systemd-helper did not exit due to a signal ok 76 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 77 - enable command succeeded enabled ok 78 - deb-systemd-helper could be executed ok 79 - deb-systemd-helper did not exit due to a signal ok 80 - random unit file 'unit\x2dbICoJ.service' is is-enabled ok 81 - deb-systemd-helper could be executed ok 82 - deb-systemd-helper did not exit due to a signal ok 83 - random unit file 'unit\x2dbICoJ.service' is debian-installed ok 84 - mask link does not exist yet ok 85 - mask command succeeded ok 86 - mask link exists ok 87 - service masked ok 88 - unmask command succeeded ok 89 - mask link does not exist anymore ok 90 - disable command succeeded ok 91 - symlink no longer exists ok 92 - mask command succeeded ok 93 - mask link exists ok 94 - service masked ok 95 - unmask command succeeded ok 96 - symlink no longer exists ok 97 - mask link does not exist yet ok 98 - mask link exists ok 99 - service masked ok 100 - mask command succeeded ok 101 - mask link exists ok 102 - service still masked ok 103 - unmask command succeeded ok 104 - mask link exists ok 105 - service still masked ok 106 - local service file exists ok 107 - local service file is not a symlink ok 108 - deb-systemd-helper could be executed ok 109 - deb-systemd-helper did not exit due to a signal ok 110 - deb-systemd-helper exited with exit code 0 ok 111 - local service file still exists ok 112 - local service file is still not a symlink ok 113 - deb-systemd-helper could be executed ok 114 - deb-systemd-helper did not exit due to a signal ok 115 - deb-systemd-helper exited with exit code 0 ok 116 - local service file still exists ok 117 - local service file is still not a symlink ok 118 - purge command succeeded disabled ok 119 - deb-systemd-helper could be executed ok 120 - deb-systemd-helper did not exit due to a signal ok 121 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dtest.service ok 122 - deb-systemd-helper could be executed ok 123 - deb-systemd-helper did not exit due to a signal ok 124 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 125 - alias link does not exist yet ok 126 - enable command succeeded ok 127 - correct alias link enabled ok 128 - deb-systemd-helper could be executed ok 129 - deb-systemd-helper did not exit due to a signal ok 130 - random unit file 'unit\x2dbICoJ.service' is is-enabled ok 131 - mask link does not exist yet ok 132 - mask command succeeded ok 133 - correct alias link ok 134 - service masked ok 135 - unmask command succeeded ok 136 - correct alias link ok 137 - mask link does not exist any more disabled ok 138 - deb-systemd-helper could be executed ok 139 - deb-systemd-helper did not exit due to a signal ok 140 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 141 - alias link does not exist any more ok 142 - purge command succeeded ok 143 - enable command succeeded ok 144 - correct alias link ok 145 - mask command succeeded with uninstalled unit ok 146 - correct alias link ok 147 - service masked ok 148 - purge command succeeded with uninstalled unit ok 149 - alias link does not exist any more ok 150 - service masked ok 151 - unmask command succeeded with uninstalled unit ok 152 - mask link does not exist any more disabled ok 153 - deb-systemd-helper could be executed ok 154 - deb-systemd-helper did not exit due to a signal ok 155 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dtest.service ok 156 - deb-systemd-helper could be executed ok 157 - deb-systemd-helper did not exit due to a signal ok 158 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 159 - enable command succeeded enabled ok 160 - deb-systemd-helper could be executed ok 161 - deb-systemd-helper did not exit due to a signal ok 162 - random unit file 'unit\x2dbICoJ.service' is is-enabled ok 163 - mask command succeeded ok 164 - service masked ok 165 - unmask command succeeded ok 166 - mask link does not exist any more /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8unit\x2dbICoJ.service ok 167 - deb-systemd-helper could be executed ok 168 - deb-systemd-helper did not exit due to a signal ok 169 - random unit file 'unit\x2dbICoJ.service' isnt is-enabled ok 170 - mask link does not exist any more disabled ok 171 - deb-systemd-helper could be executed ok 172 - deb-systemd-helper did not exit due to a signal ok 173 - random unit file 'unit\x2dgCLWv@.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dtest@.service ok 174 - deb-systemd-helper could be executed ok 175 - deb-systemd-helper did not exit due to a signal ok 176 - random unit file 'foo\x2dtest@.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dtest@instance\x2d.service ok 177 - deb-systemd-helper could be executed ok 178 - deb-systemd-helper did not exit due to a signal ok 179 - random unit file 'foo\x2dtest@instance\x2d.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dbar@baz.service ok 180 - deb-systemd-helper could be executed ok 181 - deb-systemd-helper did not exit due to a signal ok 182 - random unit file 'foo\x2dbar@baz.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dbar@instance\x2d.service ok 183 - deb-systemd-helper could be executed ok 184 - deb-systemd-helper did not exit due to a signal ok 185 - random unit file 'foo\x2dbar@instance\x2d.service' isnt is-enabled ok 186 - template alias link does not exist yet ok 187 - instance alias link does not exist yet ok 188 - template wanted link does not exist yet ok 189 - instance wanted link does not exist yet ok 190 - enable command succeeded ok 191 - correct template alias link ok 192 - correct instance alias link ok 193 - template wanted link does still not exist ok 194 - correct instance wanted link enabled ok 195 - deb-systemd-helper could be executed ok 196 - deb-systemd-helper did not exit due to a signal ok 197 - random unit file 'unit\x2dgCLWv@.service' is is-enabled disabled ok 198 - deb-systemd-helper could be executed ok 199 - deb-systemd-helper did not exit due to a signal ok 200 - random unit file 'unit\x2dgCLWv@.service' isnt is-enabled ok 201 - template alias link does not exist anymore ok 202 - instance alias link does not exist anymore ok 203 - template wanted link does still not exist ok 204 - instance wanted link does not exist anymore disabled ok 205 - deb-systemd-helper could be executed ok 206 - deb-systemd-helper did not exit due to a signal ok 207 - random unit file 'unit\x2dgCLWv@.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dtest@.service ok 208 - deb-systemd-helper could be executed ok 209 - deb-systemd-helper did not exit due to a signal ok 210 - random unit file 'foo\x2dtest@.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/tTLQ4_omZ8foo\x2dbar@baz.service ok 211 - deb-systemd-helper could be executed ok 212 - deb-systemd-helper did not exit due to a signal ok 213 - random unit file 'foo\x2dbar@baz.service' isnt is-enabled ok 214 - template alias link does not exist yet ok 215 - instance alias link does not exist yet ok 216 - template wanted link does not exist yet ok 217 - instance wanted link does not exist yet ok 218 - enable command succeeded ok 219 - correct template alias link ok 220 - correct instance alias link ok 221 - correct template wanted link ok 222 - instance wanted link does still not exist enabled ok 223 - deb-systemd-helper could be executed ok 224 - deb-systemd-helper did not exit due to a signal ok 225 - random unit file 'unit\x2dgCLWv@.service' is is-enabled disabled ok 226 - deb-systemd-helper could be executed ok 227 - deb-systemd-helper did not exit due to a signal ok 228 - random unit file 'unit\x2dgCLWv@.service' isnt is-enabled ok 229 - template alias link does not exist anymore ok 230 - instance alias link does not exist anymore ok 231 - template wanted link does still not exist ok 232 - instance wanted link does not exist anymore 1..232 ======== 002-deb-systemd-helper-update.t (DPKG_ROOT) ======= test_setup() with DPKG_ROOT ok 1 - unitH19wp.service was enabled ok 2 - symlink points to /tmp/kMDTq8mbJS/lib/systemd/system/unitH19wp.service enabled ok 3 - deb-systemd-helper could be executed ok 4 - deb-systemd-helper did not exit due to a signal ok 5 - random unit file 'unitH19wp.service' is is-enabled disabled ok 6 - deb-systemd-helper could be executed ok 7 - deb-systemd-helper did not exit due to a signal ok 8 - random unit file 'unitH19wp.service' isnt is-enabled enabled ok 9 - deb-systemd-helper could be executed ok 10 - deb-systemd-helper did not exit due to a signal ok 11 - random unit file was-enabled ok 12 - state file does not contain the new link yet ok 13 - new symlink does not exist yet ok 14 - new symlink was created ok 15 - symlink points to /tmp/kMDTq8mbJS/lib/systemd/system/unitH19wp.service enabled ok 16 - deb-systemd-helper could be executed ok 17 - deb-systemd-helper did not exit due to a signal ok 18 - random unit file 'unitH19wp.service' is is-enabled ok 19 - state file updated disabled ok 20 - deb-systemd-helper could be executed ok 21 - deb-systemd-helper did not exit due to a signal ok 22 - random unit file 'unitH19wp.service' isnt is-enabled enabled ok 23 - deb-systemd-helper could be executed ok 24 - deb-systemd-helper did not exit due to a signal ok 25 - random unit file was-enabled ok 26 - state file does not contain the new link yet ok 27 - new symlink does not exist yet ok 28 - new symlink still does not exist disabled ok 29 - deb-systemd-helper could be executed ok 30 - deb-systemd-helper did not exit due to a signal ok 31 - random unit file 'unitH19wp.service' isnt is-enabled ok 32 - state file updated ok 33 - new symlink still does not exist ok 34 - new symlink 2 still does not exist ok 35 - new symlink still does not exist ok 36 - new symlink 2 still does not exist enabled ok 37 - deb-systemd-helper could be executed ok 38 - deb-systemd-helper did not exit due to a signal ok 39 - random unit file 'unitH19wp.service' is is-enabled ok 40 - state file updated 1..40 ======== 003-deb-systemd-helper-complex.t (DPKG_ROOT) ======= test_setup() with DPKG_ROOT disabled ok 1 - deb-systemd-helper could be executed ok 2 - deb-systemd-helper did not exit due to a signal ok 3 - random unit file 'unitrTrWr.service' isnt is-enabled disabled ok 4 - deb-systemd-helper could be executed ok 5 - deb-systemd-helper did not exit due to a signal ok 6 - random unit file 'unitRMJCe.service' isnt is-enabled ok 7 - deb-systemd-helper could be executed ok 8 - deb-systemd-helper did not exit due to a signal ok 9 - random unit file 'unitrTrWr.service' isnt debian-installed ok 10 - deb-systemd-helper could be executed ok 11 - deb-systemd-helper did not exit due to a signal ok 12 - random unit file 'unitRMJCe.service' isnt debian-installed ok 13 - multi-user.target.wants does not exist yet ok 14 - All expected links present ok 15 - alias created ok 16 - alias points to the correct service file ok 17 - state file updated enabled ok 18 - deb-systemd-helper could be executed ok 19 - deb-systemd-helper did not exit due to a signal ok 20 - random unit file 'unitrTrWr.service' is is-enabled enabled ok 21 - deb-systemd-helper could be executed ok 22 - deb-systemd-helper did not exit due to a signal ok 23 - random unit file 'unitRMJCe.service' is is-enabled ok 24 - deb-systemd-helper could be executed ok 25 - deb-systemd-helper did not exit due to a signal ok 26 - random unit file 'unitrTrWr.service' is debian-installed ok 27 - deb-systemd-helper could be executed ok 28 - deb-systemd-helper did not exit due to a signal ok 29 - random unit file 'unitRMJCe.service' isnt debian-installed 1..29 ======== 004-deb-systemd-helper-user.t (DPKG_ROOT) ======= test_setup() with DPKG_ROOT /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 1 - deb-systemd-helper could be executed ok 2 - deb-systemd-helper did not exit due to a signal ok 3 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 4 - deb-systemd-helper could be executed ok 5 - deb-systemd-helper did not exit due to a signal ok 6 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 7 - deb-systemd-helper could be executed ok 8 - deb-systemd-helper did not exit due to a signal ok 9 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 10 - deb-systemd-helper could be executed ok 11 - deb-systemd-helper did not exit due to a signal ok 12 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 13 - deb-systemd-helper could be executed ok 14 - deb-systemd-helper did not exit due to a signal ok 15 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled disabled ok 16 - deb-systemd-helper could be executed ok 17 - deb-systemd-helper did not exit due to a signal ok 18 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 19 - deb-systemd-helper could be executed ok 20 - deb-systemd-helper did not exit due to a signal ok 21 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 22 - deb-systemd-helper could be executed ok 23 - deb-systemd-helper did not exit due to a signal ok 24 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 25 - default.target.wants does not exist yet ok 26 - enable command succeeded ok 27 - unit\x2dd8uCV.service was enabled ok 28 - symlink points to /tmp/kZSfTttc2e/usr/lib/systemd/user/unit\x2dd8uCV.service /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 29 - deb-systemd-helper could be executed ok 30 - deb-systemd-helper did not exit due to a signal ok 31 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 32 - deb-systemd-helper could be executed ok 33 - deb-systemd-helper did not exit due to a signal ok 34 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed enabled ok 35 - deb-systemd-helper could be executed ok 36 - deb-systemd-helper did not exit due to a signal ok 37 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 38 - deb-systemd-helper could be executed ok 39 - deb-systemd-helper did not exit due to a signal ok 40 - random unit file 'unit\x2dd8uCV.service' is debian-installed ok 41 - symlink deleted /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 42 - deb-systemd-helper could be executed ok 43 - deb-systemd-helper did not exit due to a signal ok 44 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled disabled ok 45 - deb-systemd-helper could be executed ok 46 - deb-systemd-helper did not exit due to a signal ok 47 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 48 - deb-systemd-helper could be executed ok 49 - deb-systemd-helper did not exit due to a signal ok 50 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 51 - deb-systemd-helper could be executed ok 52 - deb-systemd-helper did not exit due to a signal ok 53 - random unit file 'unit\x2dd8uCV.service' is debian-installed ok 54 - enable command succeeded disabled ok 55 - deb-systemd-helper could be executed ok 56 - deb-systemd-helper did not exit due to a signal ok 57 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 58 - state file exists ok 59 - disable command succeeded ok 60 - state file does not exist anymore after purging ok 61 - deb-systemd-helper could be executed ok 62 - deb-systemd-helper did not exit due to a signal ok 63 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 64 - deb-systemd-helper could be executed ok 65 - deb-systemd-helper did not exit due to a signal ok 66 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 67 - symlink does not exist yet /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 68 - deb-systemd-helper could be executed ok 69 - deb-systemd-helper did not exit due to a signal ok 70 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled disabled ok 71 - deb-systemd-helper could be executed ok 72 - deb-systemd-helper did not exit due to a signal ok 73 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 74 - enable command succeeded /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 75 - deb-systemd-helper could be executed ok 76 - deb-systemd-helper did not exit due to a signal ok 77 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 78 - deb-systemd-helper could be executed ok 79 - deb-systemd-helper did not exit due to a signal ok 80 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed enabled ok 81 - deb-systemd-helper could be executed ok 82 - deb-systemd-helper did not exit due to a signal ok 83 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 84 - deb-systemd-helper could be executed ok 85 - deb-systemd-helper did not exit due to a signal ok 86 - random unit file 'unit\x2dd8uCV.service' is debian-installed ok 87 - disable command succeeded /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 88 - deb-systemd-helper could be executed ok 89 - deb-systemd-helper did not exit due to a signal ok 90 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled disabled ok 91 - deb-systemd-helper could be executed ok 92 - deb-systemd-helper did not exit due to a signal ok 93 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 94 - symlink does not exist yet /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 95 - deb-systemd-helper could be executed ok 96 - deb-systemd-helper did not exit due to a signal ok 97 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled disabled ok 98 - deb-systemd-helper could be executed ok 99 - deb-systemd-helper did not exit due to a signal ok 100 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 101 - enable command succeeded /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 102 - deb-systemd-helper could be executed ok 103 - deb-systemd-helper did not exit due to a signal ok 104 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 105 - deb-systemd-helper could be executed ok 106 - deb-systemd-helper did not exit due to a signal ok 107 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed enabled ok 108 - deb-systemd-helper could be executed ok 109 - deb-systemd-helper did not exit due to a signal ok 110 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 111 - deb-systemd-helper could be executed ok 112 - deb-systemd-helper did not exit due to a signal ok 113 - random unit file 'unit\x2dd8uCV.service' is debian-installed ok 114 - purge command succeeded disabled ok 115 - deb-systemd-helper could be executed ok 116 - deb-systemd-helper did not exit due to a signal ok 117 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 118 - deb-systemd-helper could be executed ok 119 - deb-systemd-helper did not exit due to a signal ok 120 - random unit file 'unit\x2dd8uCV.service' isnt debian-installed ok 121 - symlink does not exist yet disabled ok 122 - deb-systemd-helper could be executed ok 123 - deb-systemd-helper did not exit due to a signal ok 124 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 125 - enable command succeeded enabled ok 126 - deb-systemd-helper could be executed ok 127 - deb-systemd-helper did not exit due to a signal ok 128 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 129 - deb-systemd-helper could be executed ok 130 - deb-systemd-helper did not exit due to a signal ok 131 - random unit file 'unit\x2dd8uCV.service' is debian-installed ok 132 - mask link does not exist yet ok 133 - mask command succeeded ok 134 - mask link exists ok 135 - service masked ok 136 - unmask command succeeded ok 137 - mask link does not exist anymore ok 138 - disable command succeeded ok 139 - symlink no longer exists ok 140 - mask command succeeded ok 141 - mask link exists ok 142 - service masked ok 143 - unmask command succeeded ok 144 - symlink no longer exists ok 145 - mask link does not exist yet ok 146 - mask link exists ok 147 - service masked ok 148 - mask command succeeded ok 149 - mask link exists ok 150 - service still masked ok 151 - unmask command succeeded ok 152 - mask link exists ok 153 - service still masked ok 154 - local service file exists ok 155 - local service file is not a symlink ok 156 - deb-systemd-helper could be executed ok 157 - deb-systemd-helper did not exit due to a signal ok 158 - deb-systemd-helper exited with exit code 0 ok 159 - local service file still exists ok 160 - local service file is still not a symlink ok 161 - deb-systemd-helper could be executed ok 162 - deb-systemd-helper did not exit due to a signal ok 163 - deb-systemd-helper exited with exit code 0 ok 164 - local service file still exists ok 165 - local service file is still not a symlink ok 166 - purge command succeeded disabled ok 167 - deb-systemd-helper could be executed ok 168 - deb-systemd-helper did not exit due to a signal ok 169 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2efoo\x2dtest.service ok 170 - deb-systemd-helper could be executed ok 171 - deb-systemd-helper did not exit due to a signal ok 172 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 173 - alias link does not exist yet ok 174 - enable command succeeded ok 175 - correct alias link enabled ok 176 - deb-systemd-helper could be executed ok 177 - deb-systemd-helper did not exit due to a signal ok 178 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 179 - mask link does not exist yet ok 180 - mask command succeeded ok 181 - correct alias link ok 182 - service masked ok 183 - unmask command succeeded ok 184 - correct alias link ok 185 - mask link does not exist any more disabled ok 186 - deb-systemd-helper could be executed ok 187 - deb-systemd-helper did not exit due to a signal ok 188 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 189 - alias link does not exist any more ok 190 - purge command succeeded ok 191 - enable command succeeded ok 192 - correct alias link ok 193 - mask command succeeded with uninstalled unit ok 194 - correct alias link ok 195 - service masked ok 196 - purge command succeeded with uninstalled unit ok 197 - alias link does not exist any more ok 198 - service masked ok 199 - unmask command succeeded with uninstalled unit ok 200 - mask link does not exist any more disabled ok 201 - deb-systemd-helper could be executed ok 202 - deb-systemd-helper did not exit due to a signal ok 203 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2efoo\x2dtest.service ok 204 - deb-systemd-helper could be executed ok 205 - deb-systemd-helper did not exit due to a signal ok 206 - random unit file 'foo\x2dtest.service' isnt is-enabled ok 207 - enable command succeeded enabled ok 208 - deb-systemd-helper could be executed ok 209 - deb-systemd-helper did not exit due to a signal ok 210 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 211 - mask command succeeded ok 212 - service masked ok 213 - unmask command succeeded ok 214 - mask link does not exist any more /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2eunit\x2dd8uCV.service ok 215 - deb-systemd-helper could be executed ok 216 - deb-systemd-helper did not exit due to a signal ok 217 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled ok 218 - mask link does not exist any more disabled ok 219 - deb-systemd-helper could be executed ok 220 - deb-systemd-helper did not exit due to a signal ok 221 - random unit file 'unit\x2dd8uCV.service' isnt is-enabled /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1/t/../script/deb-systemd-helper: error: unable to read /tmp/kZSfTttc2ebaz\x2dtest.service ok 222 - deb-systemd-helper could be executed ok 223 - deb-systemd-helper did not exit due to a signal ok 224 - random unit file 'baz\x2dtest.service' isnt is-enabled ok 225 - alias link does not exist yet ok 226 - enable command succeeded enabled ok 227 - deb-systemd-helper could be executed ok 228 - deb-systemd-helper did not exit due to a signal ok 229 - random unit file 'unit\x2dd8uCV.service' is is-enabled ok 230 - alias link does exist ok 231 - correct alias link 1..231 make[1]: Leaving directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' create-stamp debian/debhelper-build-stamp dh_prep -a dh_install -a dh_installdocs -a dh_installchangelogs -a dh_installman -a dh_lintian -a debian/rules override_dh_perl make[1]: Entering directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' dh_perl -d --package=init-system-helpers dh_perl: warning: All requested packages have been excluded (e.g. via a Build-Profile or due to architecture restrictions). dh_perl --no-package=init-system-helpers make[1]: Leaving directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' dh_link -a dh_strip_nondeterminism -a dh_compress -a dh_fixperms -a dh_missing -a dh_dwz -a dh_strip -a dh_makeshlibs -a dh_shlibdeps -a dh_installdeb -a debian/rules override_dh_gencontrol make[1]: Entering directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' if dpkg-vendor --derives-from ubuntu; then \ dh_gencontrol -- -Valt:sysvinit=""; \ else \ dh_gencontrol -- -Valt:sysvinit="| sysvinit-core"; \ fi make[1]: Leaving directory '/build/reproducible-path/init-system-helpers-1.69+nmu1+kali1' dh_md5sums -a dh_builddeb -a dpkg-deb: building package 'init' in '../init_1.69+nmu1+kali1_armhf.deb'. dpkg-genbuildinfo --build=any -O../init-system-helpers_1.69+nmu1+kali1_armhf.buildinfo dpkg-genchanges --build=any -O../init-system-helpers_1.69+nmu1+kali1_armhf.changes dpkg-genchanges: info: binary-only arch-specific upload (source code and arch-indep packages not included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) -------------------------------------------------------------------------------- Build finished at 2026-09-04T14:54:34Z Finished -------- I: Built successfully +------------------------------------------------------------------------------+ | Changes Fri, 04 Sep 2026 14:54:35 +0000 | +------------------------------------------------------------------------------+ init-system-helpers_1.69+nmu1+kali1_armhf.changes: -------------------------------------------------- Format: 1.8 Date: Fri, 04 Sep 2026 16:45:39 +0200 Source: init-system-helpers Binary: init Architecture: armhf Version: 1.69+nmu1+kali1 Distribution: kali-dev Urgency: medium Maintainer: Kali Developers Changed-By: Sophie Brun Description: init - metapackage ensuring an init system is installed Changes: init-system-helpers (1.69+nmu1+kali1) kali-dev; urgency=medium . * Sync with Debian. Remaining changes: - Keep wrapper around update-rc.d Checksums-Sha1: 6777e1d2ddc0e9d8ea13eab93b5b5e165dafb655 5092 init-system-helpers_1.69+nmu1+kali1_armhf.buildinfo d938b97afc91778743376a0594e76f79532d7d14 4372 init_1.69+nmu1+kali1_armhf.deb Checksums-Sha256: 6d2bbd230c5342bfbd1c65d2f48e836ceaa46d6deac6bb6b2ad27a6d10baeecb 5092 init-system-helpers_1.69+nmu1+kali1_armhf.buildinfo 524aa7747d9d1647b54262909c3f61126eba202d2f1afb91c071b705420b59f1 4372 init_1.69+nmu1+kali1_armhf.deb Files: 22dd9db690c8d382548db80a907cff53 5092 admin optional init-system-helpers_1.69+nmu1+kali1_armhf.buildinfo dfe56a62b155b2bbdb335b8cd2d3349d 4372 metapackages important init_1.69+nmu1+kali1_armhf.deb Original-Maintainer: Debian systemd Maintainers +------------------------------------------------------------------------------+ | Buildinfo Fri, 04 Sep 2026 14:54:36 +0000 | +------------------------------------------------------------------------------+ Format: 1.0 Source: init-system-helpers Binary: init Architecture: armhf Version: 1.69+nmu1+kali1 Checksums-Md5: dfe56a62b155b2bbdb335b8cd2d3349d 4372 init_1.69+nmu1+kali1_armhf.deb Checksums-Sha1: d938b97afc91778743376a0594e76f79532d7d14 4372 init_1.69+nmu1+kali1_armhf.deb Checksums-Sha256: 524aa7747d9d1647b54262909c3f61126eba202d2f1afb91c071b705420b59f1 4372 init_1.69+nmu1+kali1_armhf.deb Build-Origin: Kali Build-Architecture: armhf Build-Date: Fri, 04 Sep 2026 14:54:33 +0000 Build-Path: /build/reproducible-path/init-system-helpers-1.69+nmu1+kali1 Installed-Build-Depends: autoconf (= 2.73-2), automake (= 1:1.18.1-4), autopoint (= 1.0-3), autotools-dev (= 20240727.1+nmu1), base-files (= 1:2026.3.0), base-passwd (= 3.6.8), bash (= 5.3-3+b1), binutils (= 2.47-2), binutils-arm-linux-gnueabihf (= 2.47-2), binutils-common (= 2.47-2), bsdextrautils (= 2.42.2-4), build-essential (= 12.12), bzip2 (= 1.0.8-6+b2), coreutils (= 9.10-1), cpp (= 4:15.2.0-5+b1), cpp-15 (= 15.3.0-2), cpp-15-arm-linux-gnueabihf (= 15.3.0-2), cpp-arm-linux-gnueabihf (= 4:15.2.0-5+b1), dash (= 0.5.12-12), debconf (= 1.5.92), debhelper (= 14.3), debianutils (= 5.24), dh-autoreconf (= 22), dh-strip-nondeterminism (= 1.15.1-1), diffutils (= 1:3.12-1), docutils-common (= 0.23+dfsg-2), dpkg (= 1.23.7+kali1), dpkg-dev (= 1.23.7+kali1), dwz (= 0.17-1), fakechroot (= 2.20.1+ds-18), fakeroot (= 2.1.4-1), file (= 1:5.47-4), findutils (= 4.11.0-2), g++ (= 4:15.2.0-5+b1), g++-15 (= 15.3.0-2), g++-15-arm-linux-gnueabihf (= 15.3.0-2), g++-arm-linux-gnueabihf (= 4:15.2.0-5+b1), gcc (= 4:15.2.0-5+b1), gcc-15 (= 15.3.0-2), gcc-15-arm-linux-gnueabihf (= 15.3.0-2), gcc-15-base (= 15.3.0-2), gcc-16-base (= 16.2.0-1), gcc-arm-linux-gnueabihf (= 4:15.2.0-5+b1), gettext (= 1.0-3), gettext-base (= 1.0-3), grep (= 3.12-1), groff-base (= 1.24.1-1), gzip (= 1.14-1), hostname (= 3.25), init-system-helpers (= 1.69+kali1), intltool-debian (= 0.35.0+20060710.6), libacl1 (= 2.4.0-1), libarchive-zip-perl (= 1.68-1), libasan8 (= 16.2.0-1), libatomic1 (= 16.2.0-1), libattr1 (= 1:2.6.0-1), libaudit-common (= 1:4.1.2-1), libaudit1 (= 1:4.1.2-1+b1), libbinutils (= 2.47-2), libblkid1 (= 2.42.2-4), libbz2-1.0 (= 1.0.8-6+b2), libc-bin (= 2.43-4), libc-dev-bin (= 2.43-4), libc-gconv-modules-extra (= 2.43-4), libc6 (= 2.43-4), libc6-dev (= 2.43-4), libcap-ng0 (= 0.9.3-1+b1), libcc1-0 (= 16.2.0-1), libcrypt1 (= 1:4.5.2+20251210-1), libctf-nobfd0 (= 2.47-2), libctf0 (= 2.47-2), libdb5.3t64 (= 5.3.28+dfsg2-11+b1), libdebconfclient0 (= 0.283), libdebhelper-perl (= 14.3), libdpkg-perl (= 1.23.7+kali1), libelf1t64 (= 0.195-1), libexpat1 (= 2.8.3-1), libfakechroot (= 2.20.1+ds-18+b2), libfakeroot (= 2.1.4-1), libffi8 (= 3.8.0-2), libfile-stripnondeterminism-perl (= 1.15.1-1), libgcc-15-dev (= 15.3.0-2), libgcc-s1 (= 16.2.0-1), libgdbm-compat4t64 (= 1.26-1+b2), libgdbm6t64 (= 1.26-1+b2), libgmp10 (= 2:6.3.0+dfsg-5+b2), libgomp1 (= 16.2.0-1), libisl23 (= 0.28-1), libjansson4 (= 2.15.1-1), liblzma5 (= 5.8.3-1), libmagic-mgc (= 1:5.47-4), libmagic1t64 (= 1:5.47-4), libmd0 (= 1.2.0-2), libmount1 (= 2.42.2-4), libmpc3 (= 1.3.1-3), libmpfr6 (= 4.2.2-3), libncursesw6 (= 6.6+20260608-2), libpam-modules (= 1.7.0-8), libpam-modules-bin (= 1.7.0-8), libpam-runtime (= 1.7.0-8), libpam0g (= 1.7.0-8), libpcre2-8-0 (= 10.46-1+b2), libperl5.42 (= 5.42.3-1), libpipeline1 (= 1.5.8-3), libpython3-stdlib (= 3.14.7-3), libpython3.14-minimal (= 3.14.7-1), libpython3.14-stdlib (= 3.14.7-1), libreadline8t64 (= 8.3-4), libseccomp2 (= 2.6.1-1+b1), libselinux1 (= 3.11-2), libsframe3 (= 2.47-2), libsmartcols1 (= 2.42.2-4), libsqlite3-0 (= 3.53.4-2), libssl3t64 (= 3.6.3-1), libstdc++-15-dev (= 15.3.0-2), libstdc++6 (= 16.2.0-1), libsystemd0 (= 261.2-1), libtest-deep-perl (= 1.205-1), libtinfo6 (= 6.6+20260608-2), libtool (= 2.6.2-2), libubsan1 (= 16.2.0-1), libuchardet0 (= 0.0.8-2+b2), libudev1 (= 261.2-1), libunistring5 (= 1.4.2-1), libuuid1 (= 2.42.2-4), libxml2-16 (= 2.15.3+dfsg-1+b1), libzstd1 (= 1.5.7+dfsg-4), linux-libc-dev (= 7.1.5-1kali1), m4 (= 1.4.21-1), make (= 4.4.1-3), man-db (= 2.13.1-1), mawk (= 1.3.4.20260302-1), media-types (= 14.0.0), ncurses-base (= 6.6+20260608-2), ncurses-bin (= 6.6+20260608-2), netbase (= 6.6), openssl-provider-legacy (= 3.6.3-1), patch (= 2.8-2), perl (= 5.42.3-1), perl-base (= 5.42.3-1), perl-modules-5.42 (= 5.42.3-1), po-debconf (= 1.0.22), python3 (= 3.14.7-3), python3-docutils (= 0.23+dfsg-2), python3-minimal (= 3.14.7-3), python3-roman-numerals (= 4.1.0-1), python3.14 (= 3.14.7-1), python3.14-minimal (= 3.14.7-1), readline-common (= 8.3-4), sed (= 4.9-3), sensible-utils (= 0.0.26), sgml-base (= 1.31+nmu1), sysvinit-utils (= 3.18-1), tar (= 1.35+dfsg-5), tzdata (= 2026c-1), util-linux (= 2.42.2-4), xml-core (= 0.21), xz-utils (= 5.8.3-1), zlib1g (= 1:1.3.dfsg+really1.3.2-3) Environment: DEB_BUILD_OPTIONS="parallel=8" LANG="C.UTF-8" LC_COLLATE="C.UTF-8" LC_CTYPE="C.UTF-8" SOURCE_DATE_EPOCH="1788533139" +------------------------------------------------------------------------------+ | Package contents Fri, 04 Sep 2026 14:54:36 +0000 | +------------------------------------------------------------------------------+ init_1.69+nmu1+kali1_armhf.deb ------------------------------ new Debian package, version 2.0. size 4372 bytes: control archive=728 bytes. 611 bytes, 17 lines control 196 bytes, 3 lines md5sums Package: init Source: init-system-helpers Version: 1.69+nmu1+kali1 Architecture: armhf Protected: yes Maintainer: Kali Developers Installed-Size: 15 Pre-Depends: systemd-sysv | sysvinit-core Section: metapackages Priority: important Multi-Arch: foreign Description: metapackage ensuring an init system is installed This package is a metapackage which allows you to select from the available init systems while ensuring that one of these is available on the system at all times. Important: yes Original-Maintainer: Debian systemd Maintainers drwxr-xr-x root/root 0 2026-09-04 14:45 ./ drwxr-xr-x root/root 0 2026-09-04 14:45 ./usr/ drwxr-xr-x root/root 0 2026-09-04 14:45 ./usr/share/ drwxr-xr-x root/root 0 2026-09-04 14:45 ./usr/share/doc/ drwxr-xr-x root/root 0 2026-09-04 14:45 ./usr/share/doc/init/ -rw-r--r-- root/root 1512 2026-09-04 14:45 ./usr/share/doc/init/changelog.gz -rw-r--r-- root/root 3133 2026-09-04 14:45 ./usr/share/doc/init/copyright drwxr-xr-x root/root 0 2026-09-04 14:45 ./usr/share/lintian/ drwxr-xr-x root/root 0 2026-09-04 14:45 ./usr/share/lintian/overrides/ -rw-r--r-- root/root 183 2026-09-04 14:45 ./usr/share/lintian/overrides/init +------------------------------------------------------------------------------+ | Post Build Fri, 04 Sep 2026 14:54:37 +0000 | +------------------------------------------------------------------------------+ +------------------------------------------------------------------------------+ | Cleanup Fri, 04 Sep 2026 14:54:37 +0000 | +------------------------------------------------------------------------------+ Purging /build/reproducible-path Not cleaning session: cloned chroot in use +------------------------------------------------------------------------------+ | Summary Fri, 04 Sep 2026 14:54:39 +0000 | +------------------------------------------------------------------------------+ Build Architecture: armhf Build Type: any Build-Space: 504 Build-Time: 33 Distribution: kali-dev Host Architecture: armhf Install-Time: 32 Job: /srv/build.kali.org/build/work/kali-dev/init-system-helpers_1.69+nmu1+kali1.dsc Machine Architecture: arm64 Package: init-system-helpers Package-Time: 96 Source-Version: 1.69+nmu1+kali1 Space: 504 Status: successful Version: 1.69+nmu1+kali1 -------------------------------------------------------------------------------- Finished at 2026-09-04T14:54:34Z Build needed 00:01:36, 504k disk space /srv/build.kali.org/bin/build: SUCCESSFUL BUILD OF /srv/build.kali.org/build/work/kali-dev/init-system-helpers_1.69+nmu1+kali1.dsc (arch=armhf dist=kali-dev version=1.69+nmu1+kali1) long key IDs are discouraged; please use key fingerprints instead signfile changes init-system-helpers_1.69+nmu1+kali1_armhf.changes 0xF0535A218A86891B Successfully signed changes file Uploading init-system-helpers using sftp to default (host: repo.kali.org; directory: /srv/repo.kali.org/incoming) running allowed-distribution: check whether a local profile permits uploads to the target distribution running checksum: verify checksums before uploading running suite-mismatch: check the target distribution for common errors running gpg: check GnuPG signatures before the upload Logging into host repo.kali.org as kaliupload Not writing upload log upon request Uploading init_1.69+nmu1+kali1_armhf.deb Uploading init-system-helpers_1.69+nmu1+kali1_armhf.changes INFO: Archiving build in /srv/build.kali.org/morgue/20260904/ ****************************************************************************** Finished with status BUILD_OK at 2026-09-04 14:54:45.473924 Build needed 0:01:49.235556